Search results

Hi, here I have my ex mod series 3 project up for sale due to not having the time to have even started it never mind thinking I'll ever finish it. it's 2&1/4 diesel anti spark with original engine and it did turn by hand the last time I checked (I'll check again) although as I've stated I've...

Hi Guys, I've been the owner of a 110 now for a few years.. its a dog let me tell you :(, it was bought as a on the road project!.. Any way lets cut the long story short, when i bought it; it was fitted with a discovery 200tdi and SY4x4 did comment as much of a bodged fit it was it lined up...

I can't seem to find the answer I'm looking for... I'm wanting to fit a diesel heater but pipe it in to the existing system so I can easily direct it to the window screen etc... the standard heater has never done anything and I've tried all sorts, change radiator in box, changed fan, thermostat...

Hi Guys, I’ve recently hit a post at low speed which caused my car bolts to snap.. I’ve stripped it down and other than a wrong part everything it good without damage to the half shaft and diff. No my main question is the bolts need drilling and one of them has slightly e longated... my...

I’m in the market for some van/solid sides to replace my window panels on my 110. I’m located in Sheffield but don’t mind travelling depending on distance or possibly arrange a courier. If anyone is interested I will do a straight swap for my window panels, they are sliding windows in fair...

Guys, A funny one here.. mates D2 air suspension was dead and been on its arse for a while and wouldn’t pump back up, I’ve had a look at the guide on here but still scratching my head. It’s took a few weeks loosing air before sitting on the bump stops! When I looked both height ride sensors...

Guys I’ve took my injection pump off because it was leaking what looked like to be the rear of the pump, once I’ve got it off it seems to be below the springy thingy (if that’s the correct technical term). Has anyone rebuilt/resealed one of these or know of a workshop manual ? I’ve found a seal...

Right so yesterday I decided I’d come back to the Land Rover scene... something I’ve missed driving a pile of crap pathfinder. Bought a 200tdi defender 110 a vehicle I’ve always wanted! Did a 60 mike trip back fine on the very very steep hills the heat gauge creeped slightly above half but no...

For some reason I seem to be struggling like mad bleeding this TD4 clutch its almost like there's no enough pressure behind the pedal (although there is a bit of pressure) to release the clutch to get it in gear, its had a new clutch and slave cylinder recently and I've done the master cylinder...

Hi All, I've just built the car back up after changing the clutch and replacing it with a solid DMF conversion its the freelander 1 TD4 on a 03 plate so it haves the bleed-able hydraulics. I started bleeding the clutch up and with no luck it wouldn't go in to gear with the engine running and...

Hi Guys, Sorry to bring this up again but i've trawled online too long now... its my first time working on a td4 i'm not stripping for parts, i'm currently doing a clutch replacement while working nights too so just taking it a bit at a time over a few days. I've currently got every bolt out of...

Guys, Same old with this problem I've done some internet and it's giving me problems I've already sorted. The head had warped on my 300tdi so looked around priced it up and it was feasible to do so I had it skimmed and pressure tested all that was fine so I bought a gasket set from jgs4x4 it...

As the title, has anyone ever seen a front bumper with a reciever hitch on for winching off or some sort of reciever what bolts on some how to the front?? For some reason I can't get anyone to make me anything also I don't trust my welding lmao, I need to be able to winch off it. I just find it...

I've got a discovery 300tdi which is running dead **** at the minute sluggish as hell on hills and towing the caravan so i was thinking a deep service is in order. the list of stuff i was thinking; clean injectors drop coolant and flush renew glow plugs replace engine breather and pipe work...

So ive got a disco 300tdi and has been spot on up to now its running a bit sluggish for some reason wont go past 3k revs so when im towing or hit a hill in general and start slowing down i drop it a gear but instead of it reving high and keeping its speed or picking speed up it slows down till...

Looked all over now its doing my head in i seem to be struggling getting up to or past 2k revs but once im at about 2100 revs it picks up after that well what could it be its been serviced etc? Cheers guys

got these boot mats and im not sure what they fit

Does re mapping actually make a big difference or a big enough difference to warrant spending 150 quid on it?

Ive searched through the threads and couldn't find anything on this so sorry if I missed the thread that covered it, I seem to have a problem when im in any gear or speed and driving at 2k revs if keep it at 2k it seems to judder a little like its pulling stopping pulling stopping and so on. If...

So ive had the 300tdi a good few months and promised my self if she goes through the mot okid start spending money on her a caring more for her, so she got her 12 month ticket on the 4th with a advisory of front pads waring thin. I suppose at this point I have my haynes manual and the...