Freediscoranger
Active Member
- Posts
- 744
- Location
- Cirencester/ west shropshire
Was cleaning the abs sensors and found this plug hanging down in the wheel arch.
Any ideas what it's for? 300tdi es 1994
Any ideas what it's for? 300tdi es 1994
What's this for?
- Thread starter Freediscoranger
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
This was asked recently....and ive forgotten.
Hope this helps.
Hope this helps.
Lowlight
Active Member
- Posts
- 487
- Location
- North Wales
Could be a pad wear indicator connection?
discool
Well-Known Member
- Posts
- 13,503
It's not pad wear indicator connection they are round and black and have a O ring for water proofing, looks like a sensor connection and should be laying or connected the engine bay.
martin1512
Well-Known Member
- Posts
- 3,941
- Location
- Half way up a cliff in Dorset
Is it not a connector for a TCS sensor?
Freediscoranger
Active Member
- Posts
- 744
- Location
- Cirencester/ west shropshire
Side repeater works so don't think it's for that. I thought fog light on the front but seems a bit short. 
Freediscoranger
Active Member
- Posts
- 744
- Location
- Cirencester/ west shropshire
tcs?
discool
Well-Known Member
- Posts
- 13,503
Fog lamp connectors are white and positioned behind each head lamp.
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
its probably engine bay orientated rather than something thats supposed to be in the arch...
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
of course it is its just dropped through,most have a few plugs that arent used
Freediscoranger
Active Member
- Posts
- 744
- Location
- Cirencester/ west shropshire
fair enough, since everythings still working normally (as normal as land rovers are) ill just tuck it out the way and leave it. thanks for the ideas
