Are the jacks known for being useless on a td5.Only if i hadnt been outside halfors id still be there now.With wheel neither on or off but un movable.I had to go in and buy a trolly jack to get me out of the ###t .It was just not upto the job wouldnt go high enough.Another lesson learnt and £60 down.
jack no good
- Thread starter dmjb
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
were had you put the bottle jack
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
Operator error me thinks
Had mine 7 Years now and always does the job
Had mine 7 Years now and always does the job
- Posts
- 83,230
- Location
- Embasinga stocæ
was it the 4x4 extended lift
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
jacked it up in the wrong point.im sure landrover wouldn't put a jack with a disco that wouldn't lift it high enough to change a wheel
discool
Well-Known Member
- Posts
- 13,497
I've never had to use the supplied jack, but I would think it's only for emergency use in the changing of a wheel. So what is your problem ?
Well mine lifts mine up okay. Can't say it's operator failure, but it's either that or the wrong jack. No doubt Land Rover put the right jack in the car, but perhaps things have gone astray from then on. I believe they are all bottle jacks, sort of dark orange in colour. Possibly positioned wrongly, soft ground, or something?
arienol
New Member
- Posts
- 334
- Location
- Work London - Home Norwich
Tightened up the pressure release valve?
Disco DJ
Active Member
- Posts
- 239
- Location
- New Forest, Hampshire
Used mine a few times with no issues.
Seems strange. Either wrong jack or user error?!
Dave
Ps bought myself a 3tonne high lift trolley jack for Xmas (for DIY stuff), can now lift the car in about 4 seconds!!
Seems strange. Either wrong jack or user error?!
Dave
Ps bought myself a 3tonne high lift trolley jack for Xmas (for DIY stuff), can now lift the car in about 4 seconds!!
Last edited:
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
A std TD5 jack works perfectly well for wheel changes. Where did you put it in your attempts to lift the vehicle?
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
I reckon he tried to lift it from the sills…….
me too
...............i wonder why it has a axle shaped bend in the top of this jack? :doh:
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
me too
Obviously so you can jack it up from the sills and bend them
Obviously so you can jack it up from the sills and bend them
ah, does this also render the wheel in a neither on or off state fascilitating the need for a major purchase of another jack (that has instructions) from Halfrauds
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
ah, does this also render the wheel in a neither on or off state fascilitating the need for a major purchase of another jack (that has instructions) from Halfrauds
Indeed it does!
The only other way would be to read the instructions on the jacking handle bag or the large sticker on the jack itself
must also make sure you follow the instructions and close the valve so you can jack it up I've used the one in my 300 a few times and never had a problem even though its at least 14 now
Planny
New Member
- Posts
- 234
- Location
- West Midlands
My bottle jack from my Disco is holding my R380 box up at the moment as I took the TF box out this morning. I also use it for jacking damage out. I found it very usefull for jacking the car up surprisingly. Maybe thats what it was fitted for
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
On a DII there are notches on the control arms front and rear to accommodate the jack, rather than jacking the axle casing.
