Search results

has anyone fitted a camshaft kit from island 4x4 to there v8,are there any good,the reason im asking is the tappets on my 4.6 are due a change and im going to do the cam aswell,along with some other bits and peices,so am i better buying genuine parts or aftermarket parts:confused:

does anyone know where i can get a new seat squab in lightstone leather with green piping other than the stealers,ive looked at some used ones but they are worse than mine,as the cushion on mine has gone flat and the leather has split in 2 places on the edge with the usual getting in and out all...

well i had an interesting weekend,still got the wobbly vibrating steering issue at 50/60mph,so i had the tyres checked,turns out 3 of them have high spots on them,so after i found the receipt out as i knew they were only 10 months old,i checked the mileage as i wrote it down the day they were...

has anyone got some good tips on removing the upper and lower swivel bearings without the use of a special tool,or is it brute force with a big hammer and a blow torch,just im going to do mine to see if it will cure my steering problem,if i can get the damn drive shaft nut off many thanks in...

i know this is an on going saga for most people but i have searched the site and internet and can,t find a postive answer. firstly the symptoms are:when i get to about 60mph the steering vibrates not really aggresive but annoying as if the wheels are out of balance but it still continues to do...

could anyone throw some light on this,i have noticed a drip or two of transmission oil coming from the bottom of the switch,is the switch repairable or is it time to get a new one??

can anyone advise me,is there 2 different sizes of u/j for the propshaft,im suspecting ive got a knackered one due to excess vibration,when i phoned up to order some i was told there were 2 sizes 75mm and 82mm which would be easy to measure if the prop was stripped down of the car,but as im...

well after getting the oil leak on the back of the engine sorted,i am not surprised that something else has gone wrong,the problem this time a siezed vcu in the transfer box,i heard the tyres scrub a bit in the car park and when i did the the old jack up the front corner gearbox in neutral...

well i thought id cured the oil leak from the back of my engine,but it,s come back,i don,t know whats happened but im rather cheesed off now,i replaced the crucifix seals and rear crank seal using the rave to the letter but it,s still leaking,and there is no sign of oil coming from anywhere else...

whats the best option to renew a rear crank oil seal,on a 2000 v8 vogue. basicly im on my own doing this so am i better of trying to remove the gearbox,or strip and lift the engine out and renew it,i would have probably put it in a garage,but im not paying £400 to fit a £5 seal,any serious...

can anyone please help,i can,t get my microcat to work,and the dealer won,t help,as they have manged to lose some parts i ordered,but if i can get the part. no,s i might be able to get them elsewhere. the parts i need is the plastic over flow hose from the rad and goes to the expansion tank,also...

i was asked today is it possible to change a 4.6 thor v8 engine to a 4.0ltr,my understanding that the ecu,s would be set up for a 4.6 not the 4ltr.i know all the mechanical bits would fit ie cylinder heads inlet manifolds etc,i know the bottom half internals would be different ie pistons and...

has anyone had or got experience with a motogas lpg kit,eg any good,bad points,just ive got the chance of getting the complete front end kit for £500,but i would like an idea of what they are like before parting with cash.the only good thing i like about it.is there are proper connectors for the...

i downloaded microcat today,and following the instructions,it says if microcat has started up on autorun from inserting the disc close it and startup through my computer,then click install from disc,install as you would normally,then copy a file into various locations,then to start microcat...

the front timing cover seal has a leak on it,so im going to change it next week,while im at it im going to renew the chain and sprokets along with the front pully seal,it,s a 2000 thor v8 4.6 anything alse i should change while im in there,i was thinking of maybe the oil pump,just to save me...

well after months of fitting new bearings,ball joints,steering damper,complete track rod bar,complete drag link bar,new bushes in the chassis,it has even had new air springs and shocks,there is a terrible groaning screach type noise developed,the idiot at landrover who looked at it for me,said...

ive done a search but came to no conclusion as what could be wrong with mine,for some reason when im driving if i go over a bump the steering seems as though it jumps and theres also a fair bit of vibration,i don,t know why it,s doing it.the suspension air springs have been replaced along with...

has anyone replaced there trailing arm/radius arm bushes,if so did you use the method in the rave cd ie depressiring the air system,or has anyone done it different,just im about to do mine but 1 i don,t have a four post lift and i really can,t be done trying to squeeze uner the car when all the...

i don,t suppose anyone would know where i can get a heater pad for a set of electrochromic wing mirrors,i don,t fancy paying a fortune from the dealers and i have,nt found anywhere aftermarket that sells the pad or the mirrors any help would be appreciated.;)

i wonder if someone could tell me if there is a fuse or relay for the heated wing mirrors as mine have stopped working,i can,t find anything on the rave cd,or in the user handbook,other than they are supposed to be on when the engine is running:confused: many thanks andy