Search results

So , I linked to a thread on the wrong forum , so on here with a code on RR Sport dynamic roll. Code is C1B11-1D(AF) this off a GAP IID Tool. Im told in the last forum that this is nothing to do with the pressure transducer . This is the path I am following at the moment. . I need to go into...

Has anyone bled the hydraulic system on Dynamic response other than getting a dealer. This is on an L320 RrSport, I have just fitted new set of front hyd pipes. Refilled reservoir with 75 % of 1L .It not going anywhere. I know the valves have to be opened and then bleed electronically by...

Trying to work out whether the aux lamps should come on while in a straight line when indicating to the same direction. Surely this would obscure the vision of spotting the indicator . They come on (Aux) while negotiating bends , that seems right. I have seen daylights on and disappear while...

Range Rover sport 2007 , should the , for the want of a better description, follow me round the corner lights, switch on when the inicator is used , this is when I have dipped lights on as well of course. Just get the feling that maybe the indicator is obscured by the fact they come on ?

Have this fuel problem with 2007 L320 V8 diesal , overtaking and engine loses power. Fault lies with P000E -00. Fuel Volume regulator control exceeded learning limit. So after some research , there is a VOLUME CONTROL Valve on the pump ,. Can anyone help please, has anyone experianced this fault.

deleted

My L322 has requested a code linked to centre screen , either in the past someone has entered it and not recorded any where or you make one up. If its wrong it stalls you for 10 mns , you can deactivate but it will not unless you input the original one I presume . Anyone had this or a way round it.

I have seen lots of threads on this subject , so I’ll start a fresh. To further this , can I dismantle the blue plug that has the overlocking lever on it , i think this unit is responsible for controlling the display to the central monitor but open to any correction at this point? I have a...

Help required , I have replaced rear hub bushes and tie rods and the suspension heights are all over the place. Took the car for alignment and camber on rear offside was not adjustable due to the bolt too tight to slacken . I did this myself and changed the top/upper bush bolt and nut for a new...

Trying to activate the menu button on the instrument panel , the manual says just press for a 3-5 secs but not happening.The only thing that may be stopping it working could be that a message is trying to tell me I have a trans safe failure would this interfere with normal operations.

Does anyone know if there is a driveshaft extractor /puller for the Range Rover . I know that when I did the extraction and replacement of the shafts for the ABS repairs , they were a pain in the butt using heavy hammers etc.

Got a new Selector cable from Pentland (local dealer) and there seems to be a change, especially the slide for fixing the cable to a bracket at the gearbox end . Instead of a circular ferrule on rubber , its a much larger rubber circular mount and a nut to clamp it . Has anyone changed the cable...

If I reselect park or hold in place I can start the car , so Can someone explain how I can adjust the cable so that Park is selected in the proper position. It just seems that the lever is slightly out of sync. Meant to say L322 3.0 L

Looked at various options , like hold the tilt button and slide for twenty seconds after fuse removal but no movement or motor engagement is apparent . Got the switch down and with the plug off no apparent voltage while ign on and switch rocker correctly connects pins on contiuity , so can...

Recently replaced all sensors for the ABS system. I replaced because they showed faulty and all sorts of Air susp. /HDC errors started to infect the system. Unfortunately the rings at the rear were corroded beyond help as my replacement sensors including new fronts were not resolving all the...

Can someone help please , L 322 3.0 td6 2004, Auto, I have a starting issue or more accurately non starting issue key turns to proper position but nothing engages no clicks , have read screeds about this , so know need to locate the starter relay , looked in the black box box behind the battery...

After a few short runs over 2 weeks and going to work 8mls by the afternoon car would not turn over L322 td6 04. All dash lights on with occasional warning of transmission protection and Hdc. Checked battery not brilliant , however after a boost start and lots of key turning no clicks and boom...

I thought I would start this thread with HDC INACTIVE , Air susp. inactive with can bus error 50. I t also coincided with ABS ESP ETC. This had an error with no plausible signal at the time from rear right sensor . I was on the middle of a long run of 300 mls with no faults whatsoever . Very...

Ithought that since I searched for answers to a problem with starter clicking and found my own answer to the problem I would post to help someone else . This is the second time I have had this, the small 12v feed to the solenoid has been the culprit once last winter and now again this one . I...

Looking for a guide to remove the drivers door lock , the easy way, it won't unlock with fob, but does with key, is there's fix or is it another lock. Anyone please, can't mess about too much as a lot of work and car needed.