Series 3 - Door Tops... Dims to aperture for Slide Lock

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Skip70

Skip70

Member
Posts
21
Location
Southampton
Hi All

My 1st intro to 'LandyZone'...... Hopefully this thread will be fruitful...!

Maybe, this info in out there..! - Any assistance, looking for the Dimensions to cut the aperture to ft the 'Slide Window Lock' into the Door Tops. Don't have original old Tops... had been binned my mistake, although glass was retained by the previous owner and now have new blank Door Tops en fixing kit to assemble - No info to any Land Rover books. Any info most welcomed. Skip70
 
Thank you.... a bit of stab in the dark in searching for those technical info detail on fitting the off parts to a Series 3. Not a lot of info the Workshop Manual - seems rather scattered within, a bit of guest work needed on many odd things.
Having taken up Rebuilding a 1983 S-3 - SWB; number of Tub panels replaced with new, old panels 'bead blasted', new doors all-round, including a new Galv' Bulkhead, not the best of makes (from TT - if you get my drift...!) - hell of a lot of jiggling to do, bad design on the Windscreen mount, original fixing would not fit at all.... but engineered a solution.
Resprayed in Cell'y with Acrylic clearcoat on outer shell, seems to work well. picys to follow.
 
Hi Adrian, thank you received, that s great - allows me to move forward this Mon/ Tue to complete as Dinitrol screen sealer arrives. Skip70
 
Welcome to the forum
I7pha4t.jpg
 
You must log in or register to reply here.

Similar threads

Saint.V8
1991 Defender 110 - Hawk Central Locking Retrofit - How To....
Replies
11
Views
15K
Ian Whitewick
Ian Whitewick
H
How to remove door lock barrels on a series 3
Replies
4
Views
3K
Blackburn
Blackburn
W
Series 3 rear door lock
Replies
2
Views
1K
Webley1991
W
Dr_evil
Series King Cab
61 62 63
Replies
1K
Views
127K
discomark10
discomark10
GRUNT
Buying a second hand 90
Replies
8
Views
4K
Pikey
Pikey
Back
Top