SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
Found a couple of these on the roof yesterday, forgot I had them up there!
They're going to paint next week, and offering them with a discount...
So, they're built from 60x60x5 box section, 5mm plates each end, 60x60x5 receiver part with through hole suitable for a 14mm bolt.
Fit all normal Class 3 (50x50)blocks (although the terrafirma one needs to have the square edges rounded off).
They come powder coated satin black with a zinc primer (shot blasted first).
I supply the 2 long bolts for the verticals, you use your 6 bolts that hold your recovery eye on at the back (uses same bolt holes on OS)
£100 Inc VAT/Delivery
There's only 2, so first come first served and all that.
(Ignore the fact that the one in this pic has 2 holes, it was built specific to a customer's requirements for an attachment they already had)
They're going to paint next week, and offering them with a discount...
So, they're built from 60x60x5 box section, 5mm plates each end, 60x60x5 receiver part with through hole suitable for a 14mm bolt.
Fit all normal Class 3 (50x50)blocks (although the terrafirma one needs to have the square edges rounded off).
They come powder coated satin black with a zinc primer (shot blasted first).
I supply the 2 long bolts for the verticals, you use your 6 bolts that hold your recovery eye on at the back (uses same bolt holes on OS)
£100 Inc VAT/Delivery
There's only 2, so first come first served and all that.
(Ignore the fact that the one in this pic has 2 holes, it was built specific to a customer's requirements for an attachment they already had)
