mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
bloody hell thats a big nut
Manual Gearbox P38 oil change
- Thread starter Cavey_P38
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Before you empty it make sure you can get the filler plug out!
- Posts
- 16,482
+1....you'll be fecked if you drained it and couldn't get any back in again....
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
:dnfnoob::violent:its been a long day
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
tried to remove the 32mm nut no joy its bloody solid
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
tried to remove the 32mm nut no joy its bloody solid
hit it straight on with a hammer, the jar should shock it and loosen
- Posts
- 16,482
My L322 Fill Plug was fecking tight...really took a push to loosen...plenty of Penetrating Fluid (Not WD40) and real long lever....
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
i was swinging on the git and it wouldnt budge will try again on thursday when i get time
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Just to clarifi with the socket on the nut and a decent t bar from the socket on its lowest drop in vertical position you are pushing towards the rear of the car ie anticlockwise
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
Just to clarifi with the socket on the nut and a decent t bar from the socket on its lowest drop in vertical position you are pushing towards the rear of the car ie anticlockwise
yeah not that dumb
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
Just to clarifi with the socket on the nut and a decent t bar from the socket on its lowest drop in vertical position you are pushing towards the rear of the car ie anticlockwise
are you sure
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
:behindsofa: yip even tried the other way just incase :smash:
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
they can be very tight ,but youd want to be pushing bar toward the front
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
gave it a spray with penatrating oil so will give it a few days and try again
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
are you sure
Absolutely
vertical bar lowest point that's about the right size bar! towards the rear as pictured lol you should know 
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
Absolutely
not the same nut I know but same principle lmfao
if you push that bar rearwards it would tighten
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Your having a laff the supposed nut is on the passenger side work it out
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
no its not ,r380 has drain and filler oh rh side
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
