Manual Gearbox P38 oil change

[mutsnutz]

rhs of main box,32mm or 1 1/4 spanner needed

bloody hell thats a big nut

 

[wammers]

rhs of main box,32mm or 1 1/4 spanner needed

Spoil sport.

 

[Grit Valve]

where is the drain plug on the r380 gear box got the mtf 94 oil from local motor factors £5 a litre

Before you empty it make sure you can get the filler plug out!

 

[Saint.V8]

Before you empty it make sure you can get the filler plug out!

+1....you'll be fecked if you drained it and couldn't get any back in again....

 

[mutsnutz]

:dnfnoob::violent:its been a long day

 

[mutsnutz]

tried to remove the 32mm nut no joy its bloody solid

 

[Thor1950]

tried to remove the 32mm nut no joy its bloody solid

hit it straight on with a hammer, the jar should shock it and loosen

 

[Saint.V8]

My L322 Fill Plug was fecking tight...really took a push to loosen...plenty of Penetrating Fluid (Not WD40) and real long lever....

 

[mutsnutz]

i was swinging on the git and it wouldnt budge will try again on thursday when i get time

 

[Grit Valve]

Just to clarifi with the socket on the nut and a decent t bar from the socket on its lowest drop in vertical position you are pushing towards the rear of the car ie anticlockwise

 

[mutsnutz]

Just to clarifi with the socket on the nut and a decent t bar from the socket on its lowest drop in vertical position you are pushing towards the rear of the car ie anticlockwise

yeah not that dumb

 

[jamesmartin]

Just to clarifi with the socket on the nut and a decent t bar from the socket on its lowest drop in vertical position you are pushing towards the rear of the car ie anticlockwise

are you sure

 

[mutsnutz]

:behindsofa: yip even tried the other way just incase :smash:

 

[jamesmartin]

they can be very tight ,but youd want to be pushing bar toward the front

 

[mutsnutz]

gave it a spray with penatrating oil so will give it a few days and try again

 

[Grit Valve]

are you sure

Absolutely vertical bar lowest point that's about the right size bar! towards the rear as pictured lol you should know

not the same nut I know but same principle lmfao

 

[jamesmartin]

Absolutely vertical bar lowest point that's about the right size bar! towards the rear as pictured lol you should know

not the same nut I know but same principle lmfao

if you push that bar rearwards it would tighten

 

[Grit Valve]

if you push that bar rearwards it would tighten

Your having a laff the supposed nut is on the passenger side work it out

 

[jamesmartin]

no its not ,r380 has drain and filler oh rh side

 

[Grit Valve]

no its not ,r380 has drain and filler oh rh side

Testing James testing so he said he was pausing it toward the rear:nothingtoadd: