heated seat not working
- Thread starter paulvasey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Buy it some thicker underwear. But personally i would not let my donkey sit in the Rangie. Full swab to change on L322 unfortunately.
Last edited:
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
Usually a sign of the heating element has failed 
- Posts
- 16,475
+1usually a sign of the heating element has failed
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
+1
Im sure thats the problem as my "heated steering wheel" is not so heated anymore lol
Now it's like a ice block lol
Button lights up for a second before going out
- Posts
- 16,475
Mine does the same too....
Never had a heated SW before so I'm sure I won't miss it, but it would be nice have I guess!!
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
I'm going to treat myself to a new steering wheel soon
As the leathers a bit worn on mine
Plus the heating element is dead
As the leathers a bit worn on mine
Plus the heating element is dead
- Posts
- 16,475
I thought the same but I really like the Parchment/Walnut one and that is like £350 odd it can wait!!
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
I thought the same but I really like the Parchment/Walnut one and that is like £350 odd it can wait!!
Nice one.
But the black, genuine LR one will do
- Posts
- 16,475
True but that is still £200+ with the pad and buttons....just the wheel with no gubbins or spoke covers is £110 ish
2.0_hippo
Well-Known Member
- Posts
- 6,069
- Location
- Hertfordshire
RS2000CUSTOM
Active Member
- Posts
- 346
- Location
- The Black Country - The Miglunds
Have you done the "self-diagnosis" test yet ?
- Posts
- 16,475
???
???
RS2000CUSTOM
Active Member
- Posts
- 346
- Location
- The Black Country - The Miglunds
Fault Finding
In the self-test mode the switch indicates faults by displaying a flashing code.
The sequence to select test mode is :
1/ Press the heating switch with the ignition off
2/ With the switch depressed turn on the ignition switch to Position II
3/ Release the switch, this activates the self-test mode
4/ After 10 seconds the flashing code is displayed.
The flashing code indicates the following faults
1 Flash = Switch overtemperature
2 Flashes = Short circuit and/or interruption in the sensor
3 Flashes = Short circuit and/or interruption in the heating elements.
With the switch set to test mode, maximum heating is selected and both lamps are lit. If a fault is identified the heating is switched off and, after 10 seconds, the left LED switches off , this LED generates the flashing code. If no fault is detected the LED remains unlit.
To return to the test mode the switch is pressed twice and the sequence starts again.
To cancel the test mode the ignition switch is turned off.
sas1810
New Member
- Posts
- 1,347
- Location
- back in Willenhall, West Midlands.
now every L322 owner is scrambling to go outside and try this
RS2000CUSTOM
Active Member
- Posts
- 346
- Location
- The Black Country - The Miglunds
now every L322 owner is scrambling to go outside and try this
Works on heated rear seats as well :bounce:
As I have stated on other threads
RS2000CUSTOM said:
RS2000CUSTOM
Active Member
- Posts
- 346
- Location
- The Black Country - The Miglunds
