Search results

Hi all, I have just obtained a clutch kit as part of a job lot , that suggests that it is for a discovery. The clutch plate diameter is 240mm , with 24 splines and a spline shaft diameter of 25.6mm . It has a sticker on with the number 1754. The pressure plate has a hand written sticker on with...

Hi all, I have just spotted a lockable cubby box lid on a 1985 RRC , and wondered if this was ever a standard fitment , or has an owner fitted it himself? 1985 Range Rover Vogue EFI Auto Gold. Low Tax and ideal for export. Tax & MOT | eBay. merry christmas all ! Bob

Hi all, Just thought I would let you know about my latest RRC. Some of you will remember that I posted my last Rangey (as stolen in january of this year. Unfortunately ,it was never recovered ,and I finally got an insurance settlement for the amount that I paid for it (£1500) after they...

Hi all, Just picked up my replacement RR Classic for the one that was stolen last week . Its a '92 3.9efi se vogue fitted with a Tartarini tec99 evolution lpg system. I drove from the sellers house with just the red led on , which I take means its on petrol. I then filled up with LPG and...

Hi aLL , some toe rag has stolen my ardennes green range rover classic this morning from perry barr, birmingham , no. K484FYN .

Hi all, Just recently,I have been experiencing erratic idling and revs racing on my 1992 RRC v8 efi ( pre-cat). When I start up from cold or hot, the engine imediately races up to about 2000-2500 rpm for a few seconds, then comes back down to normal tickover. This has the added effect of...

Hi all. On my 1992 classic 3.9efi running on gas , the last 3 years of starting have been perfect . Starts up on petrol , then when revs get upto about 1500 rpm , switches over onto gas automatically. Just recently , when starting from cold , as soon as it fires up the revs shoot upto about 1600...

Hi all, I need to replace my door speakers , as they are shot ! I havn't seen any come up on ebay yet , but plenty of p38 ones . Could I fit these ? I know when I replaced the load space speakers with some later ones , the spade connectors were smaller so i had to convert to suit . Would...

Hi all,The mileometer and tripometer have packed up on my 1992 RR classic ! The problem is, is that it is the Jap export model with kilometres per hour etc. The speedo works ok. Can I fit an mph speedo console without loss of accuracy or does anyone know of a spare KPH console going . I assume...

I have just fitted a new head gasket to my '92 classic se vogue 3.9 efi , due to failure between no. 2 cylinder and the water duct , causing coolant loss. The parts (head gasket, 4 exhaust gaskets, rocker cover gasket , and some anti-freeze) , cost £13 from craddocks. How much do you reckon...

Hi All, Can I fit a one piece 10 spline rear half-shaft to my 1992 ABS Classic , as I want to eradicate the problem with the splined drive hub wearing.Cheers all.

Hi all, When I am driving my 1992 RR classic 3.9 efi , the battery light does not come on but the headlights intermittantly get brighter then dimmer , and the heater fan speeds up and then slows ! I tightened the belt a couple of weeks ago after it was squeeling. Could the alternator brushes be...

Hi all, Can anyone tell me if there is a difference between a RR Classic petrol rear axle case and a RR Classic diesel rear axle case , as they have different part no.'s. I would have thought the cases were the same , just the internals being different (ratio etc.)

Hi all, I have recently had a problem with my "Lovato" lpg system , which had been running faultlessly for the past 18 months of my ownership!There was a lack of response when accelerating hard(petrol is fine ), . Tootling along was fine , but as soon as I put my foot down , there was no...

Hi all, Acouple of days ago when I switched the ignition on first thing in the morning , there was a continual clicking sound coming from under the passenger seat , which stopped after a while .I started the car and everything was okay.It happened again the next day.Then this afternoon I jumped...

Hi All, I have just purchased off ebay , a used LPG kit for a pre EFI RR classic (twin carb.), solely for the twin 36ltr tanks that I needed for my installation. The control box that sits in the cab states that it is a VIP1 make(italien). All the wires are there,the vapouriser and main solenoid...

Hi all, I d'ont know if many of you have tried this , but this afternoon I managed to fit a new drop arm output shaft seal kit with the steering box in situ.I made a puller to remove the drop arm , then removed the internal circlip (which was broke in the groove! good job there was a new one in...

Hi all, I need to weld a couple of patches into the floor of my RR classic boot. Do I need to remove my petrol tank to be on the safe side. There are no known leaks from the tank. Cheers, bob.

Hi all, I need to fit a replacement ignition/steering lock assembly to my RR classic , but its a jap export '92 model with a different part no. due to a shift interlocking feature (ntc9440). Can I fit an alternative part (i.e. prc8907), and disable that feature, and for that matter what does...

I needed a temporary fix for my sagging headlining whilst I search for a replacement ! I bought some no. 8 self tappers, 3/4" long and some of those white plastic washer-come-caps that snap on over the screw heads. I then fitted them into the saggy areas , and although I tried to screw them in ...