Unconverting a 'special defender'

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
9

9chesh

Active Member
Posts
116
Hi guys,

I have just purchased a special build defender that has roller shutters installed in the back.

I want to convert it back into a standard defender back, but the shutters extend down into the tub.

Has anyone done an in-convention like this? Is the only option to change the entire tub?
.... Or has anyone an easier solution?

Thanks in advance

Chris
 
Pictures would be good .. sounds interesting .. ;)
 
blue beasty said:
My irony meter just exploded :eek::D:D:D
Click to expand...

:pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound: :pound:


now that is some funny sh1t.
 
Lol cheers guys,

vymegehu.jpg
 
9chesh said:
Thanks for the offer ratty, I'll give it some thought.
Click to expand...

I've got the roller shutter door off an ex AA 110 csw. One day I'll get around to fitting it.:eek: I do need to do some modifying to it as I want it on the drivers side and not passenger side as it is currently set up to fit.
 

Attachments

  • iphone 13 sept 2013 140.PNG
    iphone 13 sept 2013 140.PNG
    216.8 KB · Views: 214
Well the upper part looks easy enough - sheet of ally and a bucket of pop rivets should do it.

Now the cut out in the tub could be more fun. A decent panel basher could knock up (hah!) a shaped piece to fit the hole. You could then fit it in place with hinges and a lock so that you had an exterior accessible storage compartment (with a box behind it obv).

Even better, fit a remote release so they flop open, with a couple of rockets inside. Scare tailgaters!
 
I'd have thought it'd be easiest to swap sides and tub .. that's the beauty of Landrover to me, it can be anything you want it to be.

Just takes effort and money .. ;)
 
You must log in or register to reply here.

Similar threads

G
Dog guard for Defender 90.
Replies
8
Views
446
Anaconda
A
P
Landrover Snatch insurance/ conversion
Replies
1
Views
409
Snatched
S
B
New Defender 90 Rear Seats Conversion L663
Replies
15
Views
2K
lightning
lightning
F
110 Pickup Chassis/Bulkhead Swap order of events
Replies
10
Views
1K
ER1C
ER1C
H
Building the dream 110
Replies
10
Views
499
Highpeakdefender
H
Back
Top