jimwise68
Member
- Posts
- 41
- Location
- Sudbury Suffolk
So I bought myself a Nanocom Evolution to be able to reprogram a key fob (which i have done) and to sort out why my courtesy lights don't come on when doors open (discovered rear door switch wasn't connected, but lights still don't work properly). I've still not been able to resolve the courtesy lights, if the setting for lights is set to SMART the lights come on when door opens but don't go out. If the NORMAL setting is on then lights don't come on at all. When alarm is unarmed and the interior lights flash briefly and i can test them in the Nanocom so I know they work ok. I have also cleaned all door switches (passenger, rear and back door). Any body got any ideas or know what the default settings for the AS10 are?
Also I swapped my flasher relay for a LED one to stop the rapid flashing and think i may have disturbed something as the red MIL light on dashboard (engine with lightening flash) stays on even though the alarm works ok and the landy starts and drives ok. I have tried several different settings and nothing seems to fix either.
Does anybody know all the detail settings so I can put everything back to factory spec?
Any input or advice welcomed.
:/
Also I swapped my flasher relay for a LED one to stop the rapid flashing and think i may have disturbed something as the red MIL light on dashboard (engine with lightening flash) stays on even though the alarm works ok and the landy starts and drives ok. I have tried several different settings and nothing seems to fix either.
Does anybody know all the detail settings so I can put everything back to factory spec?
Any input or advice welcomed.
:/
