quick advice needed please

owensdad · Jul 23, 2011

i am a novice wo is about to adjust te tappets, i am not nervous about tis having read te treads, but before i go in, i have purchased some stem cover caps just in case, but intend to replace all.
question is do te caps just pop off and then just press back on again or is there anyting i should know before hand, i dont wanna get stuck half way through. pre warned, pre armed if you know what i mean

thebiglad · Jul 24, 2011

owensdad said:
i am a novice wo is about to adjust te tappets, i am not nervous about tis having read te treads, but before i go in, i have purchased some stem cover caps just in case, but intend to replace all.
question is do te caps just pop off and then just press back on again or is there anyting i should know before hand, i dont wanna get stuck half way through. pre warned, pre armed if you know what i mean

Hello mate Dave here, the stem caps just fit onto the stems once you have wound the rockers off a bit - then wind them back on and they will stay in place.

Good luck

Dave

jamesmartin · Jul 24, 2011

you dont have to fit them ,allthough i do if i have them but sometimes they are worth removing if thread is worn /tight) just where you want to set tappets ,and adjust on different part of thread

quick advice needed please

owensdad

New Member

thebiglad

Well-Known Member

jamesmartin

Well-Known Member

Similar threads