More welding plate's

Evening all
Would any one know if or where I can get the upper inner wheel arch panels from . We all know the one , it's near the seat belt mount and is a common MOT failure point on a four door , seam to remember classic rangies suffer from a similar problem . Thanks

are they really terrible, could you patch? I had to patch mine as I could find the outer rears but not the inners sorry not much help.

www.froggatts.co.uk easy-on repair panels or think there's one called yrm that do repair panels to mate


Sent from my iPhone using Tapatalk

Thank's all , seems like the answer to my question is no !! looks like another home made panel on the way .

elsie said:

Thank's all , seems like the answer to my question is no !! looks like another home made panel on the way .

Click to expand...

I had this.Day before MOT i had a poke around and my jaw dropped when my screwdriver went through the wheel arch at the seatbelt mount.Fortunately i had a day off work, so i just stripped it out and got cutting with an angle grinder.
I always keep a sheet of mild steel in the garage.Its not insurmountable to fabricate a wheel arch.Just take your time and you`ll get there.
The more i dug, the more rot i found..I cut it back to sound weldable metal and got on with it.It took the day, but it passed MOT and its still good five years later.

http://item.mobileweb.ebay.co.uk/viewitem?itemId=290633864986&index=0&nav=SEARCH&nid=48671252206

That's the ones I used.