Series 2 Inspiration for interior.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Bobsticle

Bobsticle

De Villes Advocaat
Posts
27,632
Location
Manchester
Sacrilege I can hear you say.............
Mi little 2a has had a 3 bulkhead fitted at some point in its dim and distant past. I hate it. Hate the dash hate the cracked vinyl mantle piece. I thought it might but it just aint growing on me. I quite fancy having a play with it. I do like the original 2a dash, or lack of it that I remember from my last LR but I cant see me putting a 2 bulkhead back on.
So I am thinking concept. Retro machismo. Uplifted ambionic LED with raw hide and horse sh1t. The skys the limit urban agriculture. Deep buttoned hessian and chiffon.

We aint talkin spray paint and furry dice here, its a full rip out and redesign.............

Helllllllllpppppp.............:confused:
 
Go and stand in a dark corner for a short while .......

THEN get a scrap S2 bulkhead ....chop the ****ty bits off the S3 one and weld the important bits onto the remains ....
Ok It's never going to fool a rivet counter BUT will win you a huge amount of Kudos points with the Ladeez as they bask in your efforts to go retro tastic
 
Brilliant.....................

I could then cover it with something like this.............


article-2110616-1200C5D8000005DC-739_638x314.jpg


I could do it in plastic for when the doors p1ss in.
 
I think the s3 bulkhead and vinyl dash is awful too, would love to see a landy interior done in mahogany and leather :D with axminster carpets etc and proper seals that work :D
 
Couldn't agree more. Take out a Defender dash and there's most of an SIII dash behind it. Behind that there's an SII and SI as well. Complete waste of space.

Mine's going to be a bit aircraft and a bit marine, which reflect my non-Landy interests. I bought a 1930s Elgin aircraft clock and have scanned it's face so that the other instruments all get the same font and colours, needles etc. The rest of it will be cobbled up from a bit of an eccentric/eclectic collection of stuff.

What are you interested in that isn't Landy?
 
I do a bit in wood butchery. Mainly walnut. I do love the SII minimalism but fancy playing around a bit as its so easy. Steam punk was one idea with brass pipework and old pressure dials but I would like to see how far I could take it on the posh side. Standard SII exterior with the usual lumps and bumps but Bentley inside. Just to see peoples faces when they get in.

This is one of my boxes


............

Box-Front-782x1024.jpg
 
Nice work Bobsticle, my father used to do nice gun cases for me in walnut and oak. I have done odd bits but never as good.
In my lottery win dreams I get a workshop for my lathe/mill motorcycles. A workshop for Landies/classic cars and a workshop for woodworking.
Now where did I put that ticket.........
 
Gosh, that's lovely. My skills with wood aren't in your league, but I will be using it in laminated form for structural parts. I'm already mentally redesigning to hide all of my joints in case we ever meet!
 
I cannot even cut a piece of wood to the right length! I am sure I cut it right then it shrinks when I take it to where it is required.
 
Looks good. Very good. I still hate the ill fitting plastic bits.
A thought just occurred. If you installed a small picture frame on the bulkhead with the top open you could take the chassis plate with you. Naa. wouldnt stop them nicking it.
 
You must log in or register to reply here.

Similar threads

Hard-Drive
Valuation for insurance purposes?
Replies
13
Views
1K
Hard-Drive
Hard-Drive
C
land rover series 2a diesel for sale
Replies
16
Views
3K
lorri789
lorri789
rog8811
SER 2A (that is the number plate) for sale
Replies
7
Views
2K
Dr_evil
Dr_evil
Dr_evil
Series King Cab
61 62 63
Replies
1K
Views
125K
discomark10
discomark10
Back
Top