Getting a spare key.

What's the easiest and cheapest way of getting a spare key, with remote, for our 2000 TD5?

Easiest, means going to your local LR main dealer and purchasing one from them complete, job done.
Cheapest, means getting a key blank and getting it cut then getting a second hand fob and getting that programmed.

Hi,
Try this guy
Discovery 2 Parts
Quality Used and New Parts & Accessories

Call Paul on
01206 211623 - office
07828 278465
07760 955966
07742 839393

Griff

Thanks guys. What is needed to programme it to the car?

GDM said:

Thanks guys. What is needed to programme it to the car?

Click to expand...

The fob has a code, we'll the EPROM chip does, you will need that to be attached, no code the fob is just scrap, as well if your lucky the code also in bar code form as some programmers have bar code readers.

GDM said:

Thanks guys. What is needed to programme it to the car?

Click to expand...

It depends on whether the key fob is brand new or not.

Brand new - comes with bar code and you can use Nano Evo or Hawkeye to program the key to the car;

Second-hand - you need a Nano Evo to program the key fob to the car if the bar code is not available.

Hope that helps,

Dave

i just had a blank key cut without the fob it does work but cant immobilise the vehicle a nanocom will reprograme the new fob as you have to push the button so its picks up the signal

or you can plug in the tester and do that http://www.landyzone.co.uk/lz/f8/recommendation-d2-owners-184078.html... then you dont even need a fob

as a matter of fact it's possible to programm used keys with hawkeye too converting the short code from the circuit board to the long code with this https://docs.google.com/spreadsheet...QURxY3JLM1gzdTljN2JBaVNSanc&usp=sharing#gid=0

Thanks chaps.

There are new ones on e-bay for about £35-00, so I think I will go for one of those and then try to find a friendly Discovery owner with Nanocom to program it.

new for £35

GDM said:

Thanks chaps.

There are new ones on e-bay for about £35-00, so I think I will go for one of those and then try to find a friendly Discovery owner with Nanocom to program it.

Click to expand...

Hi there, can you provide an Ebay link to these? I've just had a look but couldn't find any.

thebiglad said:

Hi there, can you provide an Ebay link to these? I've just had a look but couldn't find any.

Click to expand...

Hi B L.
I saw this key on ebay as well the other day,tried looking for it again for you,but no luck finding it,sorry bud.

thebiglad said:

Hi there, can you provide an Ebay link to these? I've just had a look but couldn't find any.

Click to expand...

Sorry, my mistake. Just looked at it again and they are a new case and blade with a used remote circuit board fitted inside. However, I guess one will do the job.

sierrafery said:

or you can plug in the tester and do that http://www.landyzone.co.uk/lz/f8/recommendation-d2-owners-184078.html... then you dont even need a fob

as a matter of fact it's possible to programm used keys with hawkeye too converting the short code from the circuit board to the long code with this https://docs.google.com/spreadsheet...QURxY3JLM1gzdTljN2JBaVNSanc&usp=sharing#gid=0

Click to expand...

Has anyone had a go at converting these codes ?