fans in the front and back
- Thread starter mudrover
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Usually for aircon. Do you have air con? If so you'll need em, if not see if they work, and use them.
classic kev
Well-Known Member
- Posts
- 3,510
Two fans in front of teh rad is normal with air con. The air con fans will not keep a V8 cool in hot weather under heavy load at low speed - you will need decent main fans to do this.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
There should be an aircon radiator in front of your main rad/intercooler as well
discool
Well-Known Member
- Posts
- 13,620
Why are the a/c fans in the way ? and why do you think you need a electric cooling fan on a V8 ?.
If you are removing the viscous fan then install your new electric fan there to suck air through the rad.
Unfortunatly with electric fans they have to be set so the engine temp is a few degrees higher before the fan kicks-in not ideal with an alloy V8 thats not designed for that.
- Posts
- 83,296
- Location
- Embasinga stocæ
well because the viscous one is noisy and half the time not needed also they suck up extra power/fuel the v8 motor is sh#t on from the start
So in the name of tesco every little helps. and i don t use the same thermo i put one in the top hose ford escort/metric thread one is best.Set to 88 degrees which is the correct temp for v8 its just that i normal put the fans in the front of the rad on a frame work. Mounting the fans behind the rad is a little more trick e. I am surprize at the size of the fans about 10in for the air con there not much smaller than the ones i use for the rad still thanks guys.
So in the name of tesco every little helps. and i don t use the same thermo i put one in the top hose ford escort/metric thread one is best.Set to 88 degrees which is the correct temp for v8 its just that i normal put the fans in the front of the rad on a frame work. Mounting the fans behind the rad is a little more trick e. I am surprize at the size of the fans about 10in for the air con there not much smaller than the ones i use for the rad still thanks guys.
Last edited:
discool
Well-Known Member
- Posts
- 13,620
Why, if the fan was set to the normal engine temperature it would be running continually trying to cool the rad when normal temp was reached. Fans cut-in when the temperature is above the normal running temp, also fan motors is not designed for continuous running.
There is already a "thermostatic overide switch" existing in the form of a temperature sensor screwed in the thermostat housing on all D1's fitted with air con. The air-con fans will kick-in if there is the likely hood of the engine overheating because of the restricted air flow that is a resuilt of the extra air-con kit in front of the rad.
Similar threads
Disco 4 (LR4)
2016 DISCO 4 sdv6
