Essex lanes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bouncing back end?

this might be why . . .



DSC06434.jpg



:doh:

bugger.



discodiscodisco
 
Did mine last year (courtesy of Bures) and i nearly lost a spring as well.

IMG_1716.jpg


Hope you get sorted soon.
If you need a temp fix in a hurry. I think I still have the old shocks buried behind the shed, But they were sagging rather a lot.
 
Some good footage there mark loving the bit at the end of video 2..... bit drifting, was very slippery! :D
 
Oh well missed another one, will use the 90 again someday for its intendid purpose.
Drove violets a couple of years ago it was bonnet level then, with a tide mark at about 6foot ! that last one of vid 3 is good, a drop to the left and about 4inches narrower than a rangie we were with it had to drive all the way with 1/2 the wheel overhanging, luckily I was in the Zuk and had no probs ;) that tree at the end is was a bit of a surpise I can tell you, it was dark by the time we got there, Had the farmer still blocked of that end to try and stop you ? we had to move random items.
 
Oh well missed another one, will use the 90 again someday for its intendid purpose.
Drove violets a couple of years ago it was bonnet level then, with a tide mark at about 6foot ! that last one of vid 3 is good, a drop to the left and about 4inches narrower than a rangie we were with it had to drive all the way with 1/2 the wheel overhanging, luckily I was in the Zuk and had no probs ;) that tree at the end is was a bit of a surpise I can tell you, it was dark by the time we got there, Had the farmer still blocked of that end to try and stop you ? we had to move random items.

The Suffolk site is open in the 22nd of this month. Maybe not what you're used to in terms of a challenge but it is a day out, none of the less.
 
Cannot remember who wanted it. But I now have a 2.1 mtr section of worktop free to anyone that collect it ASAP. Only really good for outhouse use.
 
Just put the spare starter motor on, could get too two of the bolts easy third one was well out of reach. finally managed to get a torch to find it and guess what garage that put the last one on couldn't be arsed to put the third bolt in, to much hassle probably. So it was not water tight, now it is fecked due to water getting in. Stripped it down and completely rusted and caked in crap inside, can't remember what garage put the last one in, or I would go and have a word.Still its working again so might get over to essex off road tomorrow.
 
Back
Top