electric impact wrench

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Weldy said:
It is ideal to have one at hand ..
They are an invaluable tool.. but 900 mm minimum I would say!!
Even fir cracking off wheel nuts..
But if you can get a cordless it is handy..
As if you need to change a wheel in the middle of the countryside you will need one long extension cable with a 240 one
Click to expand...
My little 18v Bosch one is rated way lower than that I think but it’s not yet failed me moving stubborn rusted stuff or getting wheel nuts off..
 
Weldy said:
View attachment 142600 Just that one...from screwfix.. it can put out nearly a 1000 constantly but initial kicks are 1250 we have the dual voltage 18/54 v 9 ah batteries in them though and they are 160 quid each
Click to expand...

cheers , only thing it’s gets expensive by the time u end up adding a charger and batteries on top

would have thought u would need at least 3ah

did look at some others and the ah was around 1,2 so wouldn’t last long

but it all gives plenty for room of thought , the 240 v one does seem to be an ideal solution for men returning half decent nm along with not much money
 
blackstrat said:
My little 18v Bosch one is rated way lower than that I think but it’s not yet failed me moving stubborn rusted stuff or getting wheel nuts off..
Click to expand...
You’ve been lucky lol..,
We have a digital high reading torque wrench at graft .. it took 1520nm to get one wheel nut of that disco when I got it... that’s what we tighten M20 bolts up to
 
Weldy said:
You’ve been lucky lol..,
We have a digital high reading torque wrench at graft .. it took 1520nm to get one wheel nut of that disco when I got it... that’s what we tighten M20 bolts up to
Click to expand...
Ah see I’ve taken the sensible precaution of not owning a Discovery or trying to undo M20 bolts that u done up ;)
 
blackstrat said:
Ah see I’ve taken the sensible precaution of not owning a Discovery or trying to undo M20 bolts that u done up ;)
Click to expand...
Yup .. discovery’s rewrite the Haines manual ... tools you need to work on a D1 are
Sledgehammer..
Oxy propain
Welder
Grinder
Heavy duty impact gun
And a silicone gun..
Oh and flash band
And wellies
 
Last edited:
Bigger is better in my book..
But like I said to mr Martin .
Yours ain’t as rusty as my fecka
So 450 should do..
Think that’s what I tighten me battery terminals up too..
 
You must log in or register to reply here.

Similar threads

SteveG4TRA
Impact wrenches
2
Replies
27
Views
3K
Nodge68
Nodge68
E
Other Impact Wrench do I need one?
2
Replies
35
Views
2K
pete12345
pete12345
Henry_b
L322 M62 Rebuild.
6 7 8
Replies
143
Views
15K
Henry_b
Henry_b
willston
Discovery 2 Mechanical to Electric Cooling Fan Conversion
Replies
3
Views
3K
JUKE179r
JUKE179r
cowasaki
Looking for an impact wrench
2
Replies
26
Views
4K
cowasaki
cowasaki
Back
Top