Impact wrenches

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
As a home mechanic and bodger of some repute, I have mainly bought Makita in the past Andy, but do have some De Walt stuff. The De Walt DCF990 has such good reviews it was a no-brainer especially for the LR.

It is a mans tool weight wise, but like any good battery power tool it is perfectly balanced, easy to control and seems superbly designed and manufactured. With the three speeds/torque there's a setting for any job. Low speed did the wheel nut on the missus sports car and mid speed some scaffolding bolts that had been up at the back of the garden for two years. I'll be doing the front axle pinion seal on the LR soon, so I guess the pinion nut will not be so much of a problem as it has in the past plus a new hub is called for on the rear so we'll see how a new 52mm impact socket does it job.

I have noticed that whilst charging the 5 amp batteries that the charger runs quite warm as unlike the Makita chargers the smaller De Walt item is not fitted with a fan. My preference would have been for a fan assisted charger. It's not difficult and reasonably cheap to fit a fan to a charger so not quite sure why De Walt does not have one. Certainly I will retrospectively fit one after the warentee (3 years) runs out.
 
My AEG 18c cordless impact wrench is a bit disappointing to be honest. In times of dire need, the clarke corded bad boy never fails. No fixing yet has withstood it. But it weighs a tonne and is huge. And corded.
 
I changed all the wheel nuts on my RR today.
So I got to use both of mine, the Dewalt 899 and the Kielder . Made life Oh so easy and the job real quick.

Only used the small one to just get the first couple of clicks then used the hand tools to finish tightening.

Cheers
 
Back
Top