pikefly
Active Member
- Posts
- 118
- Location
- Derbyshire
Hi Everyone,
Both drivers and passenger doors being replaced this weekend and can't find the answer to two queries I would like help with:
1. The seal between the door top and the door bottom - should the D section be on the outside or inside of the door?
2. What bolts should I be using to refix the lock/handle assembly - stainless or what? The old bus was butchered and seems to have been put back together with raised dome cross headed bolts which you would use for fixing metal roof sheets.
(Not antiburst lock.)
3 Should the door lock assembly have some sort of seal between it and the door - silicone sealant etc?
Cheers
Both drivers and passenger doors being replaced this weekend and can't find the answer to two queries I would like help with:
1. The seal between the door top and the door bottom - should the D section be on the outside or inside of the door?
2. What bolts should I be using to refix the lock/handle assembly - stainless or what? The old bus was butchered and seems to have been put back together with raised dome cross headed bolts which you would use for fixing metal roof sheets.
(Not antiburst lock.)3 Should the door lock assembly have some sort of seal between it and the door - silicone sealant etc?
Cheers
