Breaking 300 disco + lots of other stuff

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

200tdi ayre

Well-Known Member
Posts
5,832
Location
Ashbourne (sometimes)
Right I've got a 300tdi auto disco that I have taken the engine out of but everything else is for sale, the auto box is smooth and the kickdown works well, it has the proper transfer box with difflock not the Borg and beck one, bodywork is very straight in niagra grey, there are a few scratches but no real dents,

I also have a 4l V8 engine no ancillaries or plenum/ wiring but there is the fuel rail heads ect, was assured it was good when I got it but I've never used it so cannot prove

Hp22-4 auto box no torque converter from a low milage vehicle it's in good condition

2x 200tdi blocks 1 is the one I've rebuilt in my challenge truck thread and so just needs a head and ancillaries, the other is the engine that came out very worn bores but someone might have a use for it, I could break these if required

2x rocker units 200tdi

That'll do for now but I'm sure ill find some other treasures somewhere :rolleyes:
 
Some piccies
7F61663D-EFE3-4469-85B4-7CF27377D8A2-1220-00000108CD72E552.jpg

5754AE89-0D86-4058-8F1E-D8355D2F9738-1220-00000108C4C8E476.jpg

BF4469F1-75C9-477F-903C-FF9BEFD86810-1220-00000108D7B7FD5A.jpg

314908DC-A143-4AD6-8FBB-E9CFC4654F51-1220-00000108B4464BAF.jpg

4EE72B25-E69D-46B1-B69F-1F9E96E3AAE2-1220-0000010891F8B912.jpg

E4978967-6899-4845-B482-184E7ECEE60B-1220-000001089D8F1AAA.jpg
 
Them tyres any good?

The ones on the disco ?
I've just checked the depth the rear 2 are scorpions with 4-5mm of tread the fronts are a Michelin syncrone and a Avon range aster with 5-6mm tread the alloys just want a wire brushing to remove brake residue,

The spare if you wanted it is a steel wheel with a scorpion, 2mm tread good enough as a spare
 
Back
Top