1998 disco immobiliser probs no working key fob
- Thread starter indie01
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nigel-S
soft and furry
- Posts
- 6,070
Flat battery? and welcome! 
rlj86
New Member
- Posts
- 116
mine did this this morning, tried it a few times just a click, left it 5 mins with ignition on and then turned over leaving heater plugs on longer and it fired up.
my fob had come off in my pocket earlier and wouldnt start with a red car light with key inside it flashing, took me a while to figure the fob needs to be near the ignition to start.
my fob had come off in my pocket earlier and wouldnt start with a red car light with key inside it flashing, took me a while to figure the fob needs to be near the ignition to start.
robint
Well-Known Member
- Posts
- 7,057
what a big load of bollocks , do you work for landrover then ??
take it to a main dealer i think for about £120 you can have a new fob and get it re sync,ed far easier and be cheaper then fitting a after market peice of ****
discool
Well-Known Member
- Posts
- 13,628
No they aren't, but if you have an iffy one because it's been mistreated ie. droped you can have it refurbished by RemoteKey.
Whats a multi-lock on a gear box then
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
get one off ebay and get it programmed, cost me £25 all in
Hi Nathan, did you get it programmed by supplier or take your new fob to dealer? Guess you just need the code off alarm ECU to get it programmed..
Thanks
Similar threads
