Search results

Hi guys. Fitted a new high pressure fuel pump belt to my disco today. In order to do it had to take the battery, battery tray out and disconnect all the wiring behind the battery to give me extra access to the belt. Having done the job and rebuilt making sure everything went back in the correct...

Hi boobadog. Do you know by any chance the calibration procedure for the "roof off" micro switch?

The inlet manifolds are plastic welded together so separiting is a no no.... The best thing to do to loosen the carbon would be to soak over night in some sort of solvent based cleaning solution, nothing to harsh as you don't want to melt the plastic. parafin or white spirit would do the trick...

Hi guy's, I have yet another fault with the infamous tailgate on my freelander.... This time the tailgate glass seem's to have a mind of its own dropping whenever it feels like. The only ongoing pattern seem's to be when i come to lock the vehicle it will occasionally drop the tailgate glass...

No worries...... Watch this space! :)

Personally Satin black.............

Ay up fella's........ Got a disco 3 clutch to fit at work again this week. Figured I've done quite a few of these now and am becoming a bit of a dab hand so wondered if it would be worth my while to document the next one and produce a step by step guide for you guy's to follow? As I know they...

other than exterior and exterior ergonomic's the mechanical working's are exactly the same from 1998-2006.... In the td4 the early 2.0l diesel was replaced in 2000 (I believe) by the m47 BMW engine which in my opinion is a much better choice, but people will disagree I'm sure! do your research...

Fitted 6000k HID kit..... Lookin good!

Bonnet is definately the same.....

Smoke pro it......

Hi guy's been clearing the garage out and came across a spare IRD that I removed off a scrapper I had a while back. Not been road tested but there appears to be very little backlash when bench tested.... Gotta be worth a couple a quid if any one's interested??

perfectly..... works on all speeds.Parks, I know these motor's do suffer with parking issues.

Does sound like all the common symptoms of hgf..... Just because it's had it replaced previously doesn't mean its bullet proof, after all it is a k series. might be worth buying a test kit just to make certain???

I've got one for £25 inc postage......May be of interest to you??

You need someone to run some checks for you, could be several things..... maybe a dodgy o2 sensor,MAF sensor, Faulty coolant temp sensor, etc.....;)

Why not make your own out of some galvanised steel?? I made my own and they fit a treat......

Have you ordered a new set of wheel bearing's to??? :p

They have a habbit of leaking past the tailgate glass if it isn't seated 100%. Might be worth pouring some water over the tailgate area to see if you get any triccles seeping into the vehicle (you'll see water on the inside of the glass) If this is the case then you can easily adjust the glass...

Its an 03 wasted spark system.... did a smoke pro test to check fo any crankcase breather or vaccum leaks and all ok the fault has occured suddenly it's almost like its loosing fuel pressure as it warms up, I'm wondering if it might be an ecu fault with all the wet weather we've had, obvoisly...