Search results

Hello there, I have a 1993 200tdi Defendet and I need to move the power steering pump higher up. She’s a LHD and I’m putting in a ZFHP22 and with the engine moving forward the pump interferes with the steering drop arm. Thanks in advance for any help.

Hello there, My ABS light is constantly on and I get the following Nanocom error message:- 02-01 no battery supply voltage 02 times The ABS fuse is OK and the Hand brake warning light has also come on. When I clear the Error Codes the Hand brake light will go away but not the ABS and after a...

My 2000 TD5 auto Disco 2. A strange one, who would've thought it. My ABS light came on and the Nanocom told me it was the shuttle valve electrical fail. So I did the wiring mod and now I get the message ´11-05 shuttle valve electrical fail 011 times´. No matter how many times I clear the...

Hello again, Lots of threads about the Handbrake Light but none for my problem that I can find. I had the center console apart to troubleshoot a Gearbox Problem (2000 TD5 Automatic) and had to unplug the handbrake switch. When I put it back back together I forgot about plugging back in the...

Hello there, my 2000 TD5 auto is not going into first gear. No warning lights or anything, seems to be pulling away in second?? and when going everything appears to be working properly. The oil condition and level is fine, and every now and then First seems to engaging briefly when stating to...

Hello there, Just wondering if anyone has put a Zenith 2.25l carburettor on a 2l series 1 engine ? I will need a new carb on 'Rusty' soon enough and am looking at options. Fergus

Just had the 200TDi out of my RRC to change the rear crankshaft oil seal and when starting her back up there is a ridiculous amount of coolant water being pumped out. What has stumped me is that it is flowing (or seems to be) from the bell housing to gearbox join..!!!!! (auto box) and I mean...

The AMR 2106 on my 93 RRC has gone doolally. I was bashing off the clutch pedal (converting to auto) and it started flashing the the hazards. And it will not stop. Have disconnected it overnight but it still goes when reconnecting..!!! Does anyone know of a way to reset it...I've been trawling...

The AMR 2106 on my 93 RRC has gone doolally. I was bashing off the clutch pedal (converting to auto) and it started flashing the the hazards. And it will not stop. Have disconnected it overnight but it still goes when reconnecting..!!! Does anyone know of a way to reset it...I've been trawling...

Here's a strange one. Some a"£Ehole stole my head unit from my 1993 Classic. So I put a new stereo in but no sound at all..!!!! Wired a speaker directly to the stereo and got sound so no problems there (it's a Sony) and am wondering if there is an amplifier set up somewhere that I should be...

I bet this is the first time this question has been asked:- Has anyone ever retrofitted a Classic with air suspension. My 1983 has a two inch lift and instead of just replacing the springs etc I wonder if I could stick in an air system. Not looking to bounce her up and down to impress the...

Gents, Have a problem now. Went to start my RRC and heard a funny sound in the dash and have completely lost all electrical power. Battery is still charged but nothing electrical works, not even the Hazard warning lights. Is there a special relay I should be looking for, checked the manual but...

Hei all, Just got a RRC with a Nissan SD33T in it and want to stick in the V8 ZF Auto box that I have......but before I start to undo has anyone done this and have any pointers for me............ Not one of the usual questions I suppose..!!

Hei there, I've put a 200Di into my series but it hasn't got the coupling to hand crank it. Just wondering if any of you 'modern' fellows has ever hand cranked a 200TDi ? Used to do it too my petrol series for ages but never tried a diesel, suspect the compression is to great but be good to hear...

I have to take my wings off soon to repair the bulkhead and I was wondering if anyone has put a SII front panel in a SIII ? No point in my re inventing the wheel so would be greatful to hear if it can be done, with minimum mods of course...!! Thanks

Just wondering if anyone has fitted a 200TDi into an old auto RRC form the 80s. I am considering putting one in and am curious to know if new engine mounting brackets are needed on the chassis ? Thanks in advance.

Hei there, My 1985 3.5 EFI just stopped working out of the blue. You've heard it all before..!!! Anyhow good spark etc but the fuel pump is not turning on. I have ran a hotwire and it is working well but still the engine won't start even when the fuel pump , she fires for a second or so but...

Hi there, The DVLA equivilent in Norway wants to see the specs for the 200TDi without the turbo (as in my Sries III), would anyone be able to either supply these or know someone in Land Rover I can contact to try and get them. Thanks in advance for any help Regards Fergus

Hei there, My 200Di is spitting out a wee bit too much black smoke. Had a look at the Inj.Pump and saw that the mechanic had connected the diaphragm (fuel load delivery housing) to the inlet manifold. Now I'm really not sure why as there is no turbo and wonder if I should blank it off before...

Just tried to put on a second hand pair of AVM FWH to my Series III and found they need a special nut for the drive shafts...!!!! Oh well, back to the drawing board.