Shuttle Valve Switch 11-05 from NanoCom

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
J

jalmassi

Active Member
Posts
134
My 2000 TD5 auto Disco 2.
A strange one, who would've thought it. My ABS light came on and the Nanocom told me it was the shuttle valve electrical fail. So I did the wiring mod and now I get the message ´11-05 shuttle valve electrical fail 011 times´.
No matter how many times I clear the fault with the Nanocom I get exactly the same message recurring. Even after taking her for a short run its always the same message. Any help is much appreciated, thanks in advance.
 
The warning light is still on? If yes how did you do the wiring mod? by splicing into the switch's wires or cut and prolonged them? also did you measure the switch's resistances?
 
sierrafery said:
The warning light is still on? If yes how did you do the wiring mod? by splicing into the switch's wires or cut and prolonged them? also did you measure the switch's resistances?
Click to expand...
Spliced the wires in and I didn't measure the resistance :( Took a chance of course. I find it strange the error code is just the same and it keeps on coming with 011 times. Presuming its significant but what does it all mean....if anything.
Thanks for the help.
 
The error is the same cos you didnt fix anything by splicing into the faulty circuit and letting it in parralel with the bypass unless the switch pack is bad .So you'll have to remove the switch pack again and measure the resistances and if they are OK you have to cut the wires to the small connector cos splicing into them is not OK. Those who posted tutorials with spliced wires were lucky as teh fault was not a short circuit, see this https://www.landyzone.co.uk/land-rover/shuttle-valve-modded-but.356585/#post-4783360
 
Ah ha, now I see. I’ll cut the wires, check resistance and try again, Thanks a lot, hopefully this is it.
 
Yes, provided the resistances are OK, correct tutorial attached...except that additional connnector which IMO is futile
 

Attachments

  • SVS OPTION_B2.pdf
    685.9 KB · Views: 293
Spot on, now everything is working. Thanks for the explanation and the tutorial, really appreciated.
 
Last edited:
You must log in or register to reply here.

Similar threads

C
Disco td5 abs light
Replies
5
Views
380
Anaconda
A
berg450
Disco 2 3 amigos, time for SVS mod?
Replies
19
Views
3K
MJI
MJI
F
Disco 2 Weird rear abs sensors
Replies
15
Views
1K
sierrafery
sierrafery
Keith_L
Disco 2 3 Amigos - sort of
Replies
3
Views
492
Keith_L
Keith_L
Muddy viking
Shuttle valve bypass fail
Replies
18
Views
3K
sierrafery
sierrafery
Back
Top