Reposition 200tdi Power Steering Pump
- Thread starter jalmassi
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
Copy the existing PAS pump mounting brackets in new steel but just make them to a size that enables the PAS pump not clash with anything and add a new/longer belt.
Need to ask, where's the pump currently positioned if clashing with the steering drop arm? That's a bloomin' low position if drop arm - might as well bolt to the differential
Need to ask, where's the pump currently positioned if clashing with the steering drop arm? That's a bloomin' low position if drop arm - might as well bolt to the differential
Thank you for that. I'll scoot over there and have a look.
Thanks for that. It's a factory 200TDI LHD but as I'm putting in the ZF everything moves forward, so it's not a problem on a RHD but the LHD clashes. A 300tdi would be fine though but I have a 200tdi and a ZF from a 200tdi Disco.Copy the existing PAS pump mounting brackets in new steel but just make them to a size that enables the PAS pump not clash with anything and add a new/longer belt.
Need to ask, where's the pump currently positioned if clashing with the steering drop arm? That's a bloomin' low position if drop arm - might as well bolt to the differential
Well that's a good idea for the alternator so I'm half way there !!! thanks for that.
He makes some great stuff, disco 200 is easier as it already has the holes for the a/c pump, something the defender 200 does not.
I used his idea to make an alternator mount for my disco 200 in the series.
