Search results

Thanks, that's just what I didn't want to hear! Cv joint for YA £16, CV joint 1A dealer only part (One piece with driveshaft) £350 + VAT Guess which one I have!!! Any suggestions to quieten it while I get rid of the car?

I am trying to order a CV joint from Paddocks. The problem is I'm a bit confused with which my car is a YA999999 or a 1A000001. How can you tell? All I know is that it's an X reg freeelander td4. Does anyone know?

Thanks Blippie. I notice Paddocks do a kit for £30 which sounds reasonable. I pressume that includes the actual joint!

I am getting a noise coming from the front when going around left hand bends. It sounds to me like a cv joint knocking. has anyone had the same problem? How hard of a job is it to do, where is the best place to get the part from?

I have an x reg 3 door freelander. The wheels that came with the car were steel ones but it came with some alloys. I changed the wheels over some time ago and scrapped the steel wheels only to find out the 16 inch freelander 5 spoke wheels pressed on the drums causing them to bind (obviously the...

I haven't had chance to get under the car yet but over the last couple of weeks I have been getting a bit of a clunking when changing gears probably up to 3rd then it seems ok. I am almost 100% this is the engine mounting. I seem to remember reading something about how best to check the mounts...

Can anyone help?? Rang the Muppets at the LR parts dept! What a joke they just about new what a Freelander was! I have a slight leak on the final drive(rear transfer) where the driveshafts fit in to it. I looked on the Rave cd and it clearly shows an oil seal and a bit further in a circlip (one...

When you say stick some AT's on I have been looking on tinternet and seen modular wheel and at tyre packages for quiote Chep. Are there any modular wheels that would fit the FL? Don't know what they would look like but it would be a change from the Alloys!

I keep hearing from people from people how I haven't got a proper off roader when I tell people that I have a 3 door TD4 Freelander. My question is what improvements can be done to improve the off road ability of my car and beef it up so it looks a bit less like a hairdressers car? Only serious...

Cold weather is here and I was wondering if anyone has any electrical knowledge? My TD4 has a FBH, without spending a fortune I would like to make it remote control or timed is it possible to do anything with either one of these? Single Channel Wireless Remote Control Kit= or a timer not looked...

I think this is the website http://45zs.info/75Zt/R75tu3.htm Will your car start with easy start? Mine did initially and as the seals on the fuel stop got worse I couldn't start it with anything! The common rail doesn't build up enough pressure so you haven't got enough compression. One way to...

I had mine to 2 "Independant specialists" who both diagnosed different problems 1 being leaking injector the other which was closest was a new high pressure fuel pump £600+. If you want it back and it is under warranty it may be worth mentioning they check I think it was called the high pessure...

Hi Stewart! I take it your car will not start? Is it a TD4? If so it may be worth looking at http://www.landyzone.co.uk/lz/f9/fixed-non-starter-4p-34914.html

No it was definately a transmission noise! All I did was replace the oil and a noise which I have had for over 8 months was gone. Nothing else was touched!

Just in case anyone has the same problem! I posted a thread a while ago re my Xreg Td4 making a squeeking noise at low speed on full lock. As my MOT is due any time now I thought I would take the belly pan off and just give the car a quick check over. Everything seemed tight and leak free so I...

I did get it sorted! My problem was a split o ring on the valve stop on the injection pump! It is worth having a look at it. Basically what was happening was the fuel was returning to the tank before the pressure in the common rail had built up.

Got under the car last night intending to take the prop off only to discover I had a bolt missing from one off the diff mounts which was causing it to rattle about like a good un. Replaced the bolt (left the prop on) and it's not making any more noises. To double check the VCU I spray painted a...

I'm skint at the minute! I know it needs doing but probably not the best time for it, it has been an expensive few months!:mad: I am planning on dropping the propshaft off and driving in two wheel drive for a while. I take it that if it is the diff that is gone that is the only thing that will...

Sorry and a manual!

I'm in Wigan, it's a TD4 and when I get it sorted it's going! I've had enough of it!