Search results

hiya lads,been playing today with my wonky tilting rangie,i,ve taken the right steps to making adjustments using the calibrate page via the eas software,problem is nothing changes?the only way i can alter the height is by the height page.should i be using this page?if ok can someone please give...

hello lads has some of you may know my rangie,s sitting on the ****:(anyway i,ve got a good idle with the software and i,m getting a rl incorrect signal fault?but i think the biggest fault is ME not been electronically minded,so is there any eas experts around the b,ham area who don,t mind...

hello lads,merry xmas,i,ve decided to investigate my tilting 2.5dse,first of all does the obd11 have to be serial,or can i get away with the usb i,ve bought?i,ve plugged the cable in and i,m getting the ff,s in the rx columns,i can also connect to the right port.but i,m also getting a the bad...

merry xmas and a happy new year to all,especially those who have helped me through the dark days of p38 problems,cheers all have one on me:)

hiya lads,is there anything that can maybe stick,a valve or something that can intermitently make my rr sit on the ****(drivers side).i,m not talking 5mm i,m talking 2 inch:eek:.the lads at work have always said it looked a bit lop sided but i,m actually driving with my nose squashed up against...

hiya lads yesterday i caught my first glimpse of the baby rr evoque due out next year,very very sexy,infact its that sexy i,ve already told myself i,m having one.and when i do it may be 10yrs old with 120k on the clocks but i will one day be driving a rr evoque,can,t wait:)

hiya lads,i,m driving 150miles each day this week in my 2.5dse:eek:.i was worried about overheating issues but touch wood so far so good.but i,ve just got a key fob battery low level light come up.anyother time i would,nt worry about this but i need the car for the next 2 days,i have no spare...

hiya lads,i,ve a daily drive of 130miles for a week soon so i,m fairly keen to sort out my overheating issues on my 96dse.here we go then.i can drive the car all day long in any temp and the gauge sits at 12 o,clock,but a couple of times after the car has been underload or sat in traffic the...

bit of a daft question i know but does anyone know whether a 3.9v8i viscous will fit a range rover 2.5dse,the fitting looks the same.only asking has mines knackered and i have a good 3.9 spare.

hello lads,changing my no4 injector,but sods law the old one wont budge:(any tips?rave says torque to 65nm but this is solid.

hello lads,i,m ripping out the serpentine system from my 3.9 disco.questin is how do i go about removing the aircon pump with the gases.is there any way of depressurising the system or is it a job for the pro,s.cheers

hiya lads,i,m ripping all serpentine parts off my disco 3.9 for a fellow lzone member,question is how do you get the aircon pump off.i don,t mean boltwise-its off i mean gas wise.im under the impression you should,nt disturb aircon lines,the liquids dangerous?or it haynes talking s**t

i know this is in the wrong area but i thought it would be better noticed here:).due to breaking my 98 plate disco i have a 3.9 engine/gearbox for engine needs a timing cover(but has new camshaft/tappets/timing chain).125000 miles.no ancillaries.offers.cheers

hiya,after having my o-rings leak my carpet as worn away on drivers side footwell.has anyone done any sort of carpet transplant,i quite like the look of the red you see in the limited edition bordeax model,any ideas much appreciated

i know,i know this thread is in the wrong section but i thought it would be noticed more here.:).so here goes i,ve fooked my timing cover up and in desperate need of another so can anyone help me out.cheers

hiya,having had the temp needle creeping up close to the red i,ve decided to drain/refill the coolant but i,m struggling.with only 2 litres of coolant put back in the system won,t take anymore.i,ve tried squeezing all the pipes to no avail.am i missing something?does the engine need to be...

hiya,im in the process of changing my camshaft,but i,ve hit a stumbling block.do i have to remove the sump in order to take the timing cover off.haynes says remove 2 front sump nuts and loosen another 2 each side?the fooker wont budge.do the 2 front studs come out?cheers

hiya in trying to sort my starting problem i,ve checked battery voltage.it reads 12.7v,but when cranking drops to 10.3v.if theres one thing i have,nt a clue about its vehicle electrics so it goes without saying any help much appreciated.thanks

hello lads i,ll give it another bash:),i have air bubbles ****ing out around the base of no1 injector.i,ve tried tightening-no good.could this be contributing to my dodgy start probs?i,m in two minds whether to take it out but i,m ****ting meself just incase some caggy handed fooooker has cross...

hiya i have diesel/air bubbles ****ing out the bottom of my no1 injector,question is before i get the old spanners out what sort of seal is housed on the bottom of the injector,don,t want to left carless till my local landy shop opens tuesday.cheers