Search results

Is it normal to get oil feeding back to the air box. I think the plastic thing on the side of the cover is a separator. If its not right what's the fix? Thanks

Anyone got any helpful ideas on how to get two stubborn bolts off as they are now rounded off? Thanks James

I have developed a vibration that sounds to be coming from the rear of the disco when under acceleration at speeds over about 40mph. I thought it was the rear prop UJ's were shot, but I have just jacked it up and checked and they are all fine. I have also checked the wheel bearings and they...

Just change my steering box on my 200tdi for a recon one mainly becuse it was leaking. The recon box seems to have about an inch of play on the stering wheel, is this correct or should I be going back to the supplier about it? Thanks

Just off to work this morning and ofund on the first hill the powerwas not there in the same way as normal. struggled to rev it. I went to fill up with fuel as I was getting low to make sure it was nothing to do with that. Carried on my journey and it only got worse. I would put push the...

Just changed overy my gear box for a second hand one. I am haveing two troubles, in the proces of getting it in I have managed to bend bothe the gear leavers slightly, what do I need to do to remove them and swap them form my old box. Also the main gear leaver does not sit central ie. 3rd up...

Just coming back from holiday today and I broke down, I was at the lights, tried to pull off and it sounded like it had popped out of gear, so ree select 1st, nothing, 2nd, nothing, difflock, nothing,etc, etc. Had to get recovered back home. In gear I would expect if there was a problen at...

My Crank chaft pulley is a bit wobbley when I grab it and move it. What could the be, I get the feeling it is going to be a big job!

Just had the MOT today and it has faild on various parts, not sure where to start with 3 of the lines: Brake performance not tested. Service brake efficiency below requirements. Parking brake efficiency below requirements. I think the hand brake is to do with the leaver as there is also a...

After changing avery part of my steering I am still having problems. There seems to be play in the steering box, is there a way of tightning this up or is it a new box job? The one I have is only about a year old recon. Cheers

I noticed to day that the clutch pedal feels different, like the biting point has move further down and I need to puch it to the floor to dusengage it properly. It has also been making a bit of noise recentley when I push the prdal at all. My question is, is my clutch on its way out and is...

Any bright ideas how to get the track rod end ball joints off the track rod and draglink bars if they are rusted on? I have got 2 off but the other 2 are stuck solid? Please help as i could realy do with getting the landy back on the road. Ta

Just been looking under the bonnett and saw that there is a T off the vacume hose for the brake servo. This was split and just about to fall off on mine, fixed that, but where does it go. I see it disapear on the near side throught the bulkhead?

When I am driving along on straight sections of road I find the steering wanders, not like the tracking is out but just randomly decides to head off one way or the other leaving me to recorect it. Generaly it is ok on cornering. I have recently changed all the discs and done the bearings...

I have just changed the front pads and discs all went well but I now after a few miles the pads seem to be loose in the calipers. I assume this means that I might have the wrong ones? Has anyone else had similar problems? Cheers James

Noticed today that ocasionaly my brakes sound like they are grinding, checked the pads and there is plenty left all round. Any ideas what may be happening? They also pull to one side but I think this is because I need to do the bearings.

Just put my disco through its mot today, it failed! I was wondering what peoples thoughts were on the statment 'Front indicator incorrect colour' am I looking to replace the lense for this one? Also the same point on the other side came up on the adviseries as 'slightley discoloured'. The...

I have had to change the front prop on a 90 as it had broken the UJ and busted the prop its self. In the process it has worn away the tops of two of the bolts at the transfer box end. The bolts obviously wont come out easily. So the question is can I remove the flange on the transfer box...

When i start up in the morning, for the first few moment of triying to turn the wheel it is ok to start with, then I find it realy stiff as if the pump is not working, then it clears up for the rest of the day. Any one got any ideas. Thanks

I was driving home on Sunday with my caravan on the back when I noticed, what looked like the radiator was ****ing water 2ft out infornt of the car. The temperature was not going up or any other affects. When I got a chance to pull over in a parking area all I could see was the front grill...