Search results

I figured out I have a leaking part below the intercooler pipe on top of the engine. ( sorry forgot to make picture) It's going in the plastic pipe and engine on the side. And is like no seal between which makes the oil leak on both ends. Not much, but annoying over time. It looks like a...

Hi Gyys. I have a question. The drivers seat on my p38 is badly ripped at the side. Did anyone use some.good covers which are not folding up or looking scruf after a while to cover such rips? Or use on the front seats and they last . The normal stuff you can buy just looks ready to throw away...

Tabge Tover p38 2.5d bmw engine 1997 Automatic What diesel filter dos this car need please. ( out of experience I ordered a couple things wrong, so I better ask. ) Pic for the fuel filter in the car ,.

Just a quick question. After having problems.over the past week and trying to sort the timing out which causes the gearbox also switching gears temperamental up to higher revs. Had gearbox trouble when I bought the car till I replaced the batterie for a bigger on. Now today I had after an hour...

1998 p38 2.5 d bmw 6 cyl automotive Hiw many temperature switches dos that have please? I did exchange a green one under the manifold. Is there another one somewhere ? And if so, would anyone have the location and partnumber to hand. Thank you

Hi People. Can anyone help with blower.motor questions please ? 1997 range rover p38 2.5d Are both side heather blower motors are the same ? And / or would anyone have the part number for it by any chance please. I replaced the driversude one before and now the passenger side dosnt work...

Question, my p38 2.5d auto started revs up and down erraticly but not all the time. I been told it could be the crankshaft sensor? Just to confirm it could be the problem, so I get someone to replace it. Been showen a picture, it is apparently located above the starter motor Also, always...

After about 10k miles in a bit over 1 year and so far, touch wood no major problems.apart from a blown bulb, I should start fixing this dreaded oil drip. Not loosing any amount from it but the p38 always marks his territory which is annoying. I know it comes.from the oilfilter housing somewhere...

I know the standard size for the p38 on 18 rims should be 255 60 r18 As of now I have 255 65 r18 which take the tacho out by about 10 mph above 50. Not a problem as I have gps speed anyway on display. Now I been offered 2 choices very cheap. One - 255 55 r18 near new or a l322 255 version of...

before i explode after spending today 170 unnecessary pound in this peace of metall for a new radiator it now has the red light for brakes on. nanocom says brake pressure switch failure. it is impossible spending this amount on money in any car. i wouldnt even spend at service costs in a new...

guys. how do i fix a radiator on top ? or where do i get a replacement by tomorrow? 1996 2.5 dse p38

am I right assuming on the18 rimms the maximum tyresize.i can get on is 255? Without modification like wheelspavers etc pp. Just asking as I been told by a tyre dealer.go for 265 . ???

Morning. I just came.accross a post on fb where someone suggested to use nanocom for bleeding brakes on pre 2000 p38. I tried to find out how but there is no function, well I didnt find.one, for it. Tried to look nanocOm instructions but can't get any info for this. Only for the disco 2...

Nothing serious and nothing which need working right now. something i been looking around and can not find any distinctive information. its just one of them things on a car , if you believe the manufacturer - they telling you one thing, and most likely the most expensive one - people another...

help. I just had the dreade keylockout coming up on middle of leicetser. Anyone around with a nancom. I'll pay for help.

Guys. just r#tried to go out in the p38, it opened it started and then i notice no illumination on any lights in the dash or any cluster working. no temp. no fuel no revs. nothing. but it runs and drives. checked fuses and they all ok. if you switch the ignition on stage 2 no lights coming on...

is this bolt on the bumper.on the chassy / Frame ? The one it seems the bumper is sitting on. ( sorry for the bad picture ) Need to find easiest acces to frame for strong towingpoint. Not the towing hook. ( the bolt ( hole ) above the towing hook )

I changed the abs sensor today. - came up the other day as fault. So by looking under the car it looked like a wedged in abs sensor.lead. Today dismantled it after the new one arrived and figured out someone must have changed the hub. The not working speed sensor is in the hub. There is a...

could anyone tell me what size and type i need to remove the front brake caliper on my 1996 dei please? just want to make sure i have everything handy before i start on it. i need to take the wedged abs cable out from behind the wheel hub and repair this rattle from the disc cover plate...

Morning, so, new batterie, all nice working apart from need to exchange an abs lead which i have and get done this week, no matter how. lol and a dreaded oil leak i need to find. lol heather? i assume the problem is on the flaps? but to explain .. i found this Manuel testing page on here, how...