Search results

Hey I've discovered there is air leaking at rear drivers side airbag collet, I'm thinking it could be o rings, can they be changed in situation, if so any tips or would pulling airbag be easier in long road

OK folks a few months ago I had airbag fault, the autologic connected no trouble but Saturday car all of a sudden dropped lights flashing so I slowly drove the 26miles home then a mile from home I got eas fault 35mph max and I cannot clear it. The problem was a broken o ring in compressor which...

What would cause neither part of cruise control switch to light, I mean the green symbol doesn't light nor does the orange on indicator, I have changed switch, cruise control works fine and I have tested bulbs and there OK but it just doesn't light

Hi a couple of weeks ago coming home I got a random 3 beeps but nothing showing wrong today going up hill sustained foot down again I got 3 beeps then nothing then 10 seconds later 3 beeps and something flashed on dash but was so fast couldn't read it and again nothing else wrong, I checked all...

Hi I was wondering what are the bulbs for dash and how do I get to them, my cruise control green symbol and orange on light don't work and the green rear heated and front heated screen symbols don't light up so could some nice soul tell me what bulbs they are and how are they got to, TIA...

Could anyone give pointers were to check, it has hiline becm, button on dash and set/res on steering wheel and under driver side vent is what looks like a relay but if I press button on dash nothing happens

OK peeps here goes, the passengers seat is working perfectly but drivers nope lol, I checked car side plug and got 14. 65v do moved onto seat for continuity the base was 0.61 but backrest nothing so I bridged backrest plug on car side and base started to heat so I know backrest heater not...

Can anyone recommend a repair kit mine is broken on passengers side or any cassettes for sale cheap

Does anyone have 1 for sale and willing to post?

I put car for MOT today and long storey short the tested hasn't a clue on 4X4'S so aborted the test saying he couldn't test handbrake I think he was trying on rollers saying the reading was all over the place and it wasn't wanting to stay on rollers so how is it done, apparently everything else...

Hi, I was fixing passengers blend motor and had airbag out, everything was connected and I've had it in several times with no issue but now I have airbag fault and pulsing SRS light, when it was put in it pulled the blue cable out the red plug, its since been refitted but does the light remain...

The passengers blend motor wasn't working do I removed it and stripped it down I found the flaps work fine and the motor in box does as well but inside the box there is 5 cables but cables to there is 6 cables, the extra cable is like a cream colour so my question is what should it be connected...

Sorry if this has been asked before but I couldn't find anything suitable, does anyone have pics of gearbox and engine covers fitted I hot some but cannot find anywhere that looks like it can attach to, I also don't have rave, I've tried but not sure on the problem why it won't load and Aldo a...

Just thought I would make a new post so doesn't get lost in my other post, my brake pump before was working every press of pedal and lights on dash taking 30+seconds to go out so I changed accumulator on heavy brake press the pump is going every 3-4 pedal presses, usually 4 and light brake or...

Hey, I did water pump, viscous, thermostat on Sunday and the fan is terribly loud, I've compared it to old fan and blades are different angle so I would like to fit older blades onto new viscous coupling and rather than undo rad pipes and bleed again I wondered could the cowling be moved back...

Hi peeps, today I did my water pump, thermostat, drivebelt, viscous fan and AC belt, I don't have a suitable torque wrench for AC tentionerso I pushed it up as tight as I could then tightened but but with AC off it all sounds fine but AC on it screeches something awefull but blows nice and cold...

What is the connector size from the flexible AC pipe from compressor to solid pipe from expansion valve, it looks fairly large

I've been trying to get car gassed but now using a machine it has a few leaks 1 being behind dash and going by location of evaporator I wondered if anyone has managed to remove dash mat and were did is has anyone made like an access panel in there and if so can you get to evap o rings??

I couldn't find and dexron 2 or 3 fluid in shop and automatic gearbox was a little low, I had some comma aqf mineral in house and topped up box with about 250ml will it cause damage

On Sunday I put car in for regassing it passed vacuum, pressure and leak tests put 820g in car then machine run out of gas but technicians kept it going saying it would fill slowly, then when it wouldn't they disconnected it refilled machine and started again sucking everything back out but it...