Window winding motor banging

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

dino64

New Member
Posts
17
Location
Manchester
Hi when I wind the window up fully on the drivers door there is a repeating banging noise so i took the panel off and shone a torch on the the motor cog whilst pressing the window button and the cog is continously turning and slipping on the teeth of the arm. it only does it when the window is fully up and it is showing a message saying window not set, i have set the window but message stays the same!?! Does anyone have any idea how to fix it? Its a 1997 P38 Cheers
 
Last edited:
Yep window regulator gone, regular fault. You can fool the system and set the window by putting a 2 inch block of wood between the window and the top of the frame when you run the window up. Rimmers Bros are good for regulators, easy job to do.
 
Thanks guys thats great, how easy is it to change the regulator and replace the door handle cable? Much appreciate some help!
 
One of the most common posts on here.
A "Cheat" to get rid of the Window Not Set message is to place a piece of 3" thick timber between the glass and top of the opening, raise the window and this will fool the system into thinking that the window is set.
 
You must log in or register to reply here.

Similar threads

Cornishdefender
Buffeting wind noise with 1 window open
Replies
12
Views
1K
Alibro
Alibro
feyniriel
P38A How to fix electrical problems on the road
Replies
4
Views
947
feyniriel
feyniriel
A
Disco 2 window motor slow.
Replies
9
Views
1K
JUKE179r
JUKE179r
H
L322 Window and Mirror weirdness
Replies
1
Views
2K
kermit_rr
kermit_rr
Flossie
P38A Hvac motor query.
2 3
Replies
49
Views
4K
kermit_rr
kermit_rr
Back
Top