Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
But you can check if they are opening in the order you have nominated .But you can't open the inlet or exhaust valve and a solenoid valve at the same time.
But you can check if they are opening in the order you have nominated .But you can't open the inlet or exhaust valve and a solenoid valve at the same time.
It's exactly the same software as the P38 download.Im sure the EAS is there on the All Comms just not sure if it only reads fault codes or if it can read sensor values etc!
But you can check if they are opening in the order you have nominated .
Tried the All Comms and it does have the P38 software but it is Tx but not Rx on the car.
Dopey and i are now a bit stuck as without clearing the codes we are not sure if the system is back up and running again.
The two valves on the bottom were the wrong way round and is all back together....
Anyone local with diag would be handy a the All Comms isnt talking to the car!
Yea its ride hight, but still Xmas tree lights beeping and eas coming up, but ridable,
Gone up to access and the comp is running, just 35mph warning and all lights flashing.
Plug in All Comms the system beeps to confirm connection but when you open comms to the car it flashes Tx but no Rx.
The All Comms uses a usb lead so there is no comm port errors and it still works on my L322 so i know the comp and lead are good!
As i was with good company, i kept my temper! Just feel gutted we couldnt clear the faults as thats all it needs now to make sure it works!
Frustrated!
Gonna get back to the office and see what i can do in the meantime!
No, not if it's leaning. Put it off until it's fixedI just remembered, have an MOT 2morrow, should pass like that shouldn't it?? its not on the bump stops
I just remembered, have an MOT 2morrow, should pass like that shouldn't it?? its not on the bump stops
Possibly not...I just remembered, have an MOT 2morrow, should pass like that shouldn't it?? its not on the bump stops
No, not if it's leaning. Put it off until it's fixed
Don't want to sell him a lead at this stage as it sounds like a comms problem with the OBD connector. The Allcomms is known to work with the P38 EAS.What you doing on here, get in the shed and make a lead?
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!