undergeared lander

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I will have a looksie at mine next time I am on the dual cabbage way. I only thought a couple of days ago it revs high.
My 235 75 15s should help when I finally get them on!
 
1.8 box does not fit a td4 iirc. I always feel that td4s are wrongly geared. With 15 inch wheels and 195 80 15 tyres mine does about 2900 at 70 but the rev counter is a but variable so could be up to 3100. It's ok but you can't comfortably go much faster in my opinion
 
I'll have to drive mine on the motorway or dual carriageway to find out what my TD4 auto does with 225/65 R17 tyres. Not thought about it, but they are about 6% larger..... (or about 10% larger than the 215/60R16 winter tyres on 16: rims I had on before :D )
 
roccotune said:
1.8 box does not fit a td4 iirc. I always feel that td4s are wrongly geared. With 15 inch wheels and 195 80 15 tyres mine does about 2900 at 70 but the rev counter is a but variable so could be up to 3100. It's ok but you can't comfortably go much faster in my opinion
Click to expand...

The rev counter and speedo can be up to 10% inaccurate in ether direction. This makes accurate speed and rpm measurements impossible with out using the engine live data and a sat nav.
 
I have a Scangauge 2 fitted.

Just been on the motorway.
Speed (adjusted by 6% to compensate for larger 225/65R17 tyres) now agrees with my Tom Tom GO 6000 almost all the time.

60mph = 2150rpm
70mph = 2500rpm

2006 TD4 auto.
 
Last edited:
Just remembered this thread..... On the way to work yesterday I checked.

60mph 2750rpm

70mph. 3250rpm

And I know my speedo under reads by about 9%
 
vilguy said:
60mph (according to the speedo) is 2900 rpm!
Click to expand...





My L series-

50mph - 2000rpm
60mph - 2400rpm ish, maybe a touch more
70mph - 2800rpm ish

215/65 16 tyres

I have a spare L series gearbox but it needs a little repair around the drain bung
 
Last edited:
vilguy said:
Well mines way out then. I've not checked out the bell housing yet but there is a big discrepancy.
Click to expand...

Allowing 10% inaccuracy. If you are getting an engine speed of around 3200 Rpm at an indicated speed of 70. It's very likely that the 1.8 box has been fitted at some point.
 
I think the only sensible thing to do is put the biggest tyres you can on.....what a shame!
 
i put a set of 205 80 16s on today on the rear. got to order some more to do the front. the rear seems noticably softer (which with a pregosaurus rex is a benefit) hopefully they will help.

need to do a lift before i go any bigger of course but got lots of other vehicles to sort in the meantime.
 
vilguy said:
i put a set of 205 80 16s on today on the rear. got to order some more to do the front. the rear seems noticably softer (which with a pregosaurus rex is a benefit) hopefully they will help.

need to do a lift before i go any bigger of course but got lots of other vehicles to sort in the meantime.
Click to expand...

I hope you have removed the propshaft?
 
You must log in or register to reply here.

Similar threads

D
Disco gearing with bigger tyres
Replies
4
Views
892
discomania
D
Jongould
1991 200TDi - £2750 with T&T
Replies
4
Views
1K
Jongould
Jongould
landowner
560 miles to collect a rusty Disco - must be mad
2
Replies
20
Views
2K
landowner
landowner
Booger
Morocco 2010 - Booger's Report
2
Replies
34
Views
11K
onelife
O
The Mad Hat Man
Frequently asked questions
Replies
7
Views
3K
stownrow
stownrow
Back
Top