tyre pressure and vibration ?
- Thread starter tomkbucks
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,296
- Location
- Embasinga stocæ
Do the chalk test
bobbler
New Member
- Posts
- 2,773
- Location
- County Durham
i think you draw a line across your tyre and go for a drive, when the chalk wears evenly you have the correct pressure.
from what i have read on here most put 28-30 in the front and 32-36 in the rear but not seen anyone with your size before
from what i have read on here most put 28-30 in the front and 32-36 in the rear but not seen anyone with your size before
- Posts
- 83,296
- Location
- Embasinga stocæ
exactly - make sure yu do it with all tyres and use an average across an axle.
blackvulcan100
Active Member
- Posts
- 188
- Location
- In the Cotswolds
According to my Land Rover manual the tyre pressures show As :
FRONT 28LB 1.9 BAR REAR 38LB 2.6 BAR
Thats a whole 10lb more pressure in the rear !! ??? is that right ?? got to be aint it if its in the manuel ?
FRONT 28LB 1.9 BAR REAR 38LB 2.6 BAR
Thats a whole 10lb more pressure in the rear !! ??? is that right ?? got to be aint it if its in the manuel ?
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
I find the car feels & steers better with the fronts at 31/32psi.
wingers1982
New Member
- Posts
- 9
usually 28 front 38 rear but i run 30 in front
blackvulcan100
Active Member
- Posts
- 188
- Location
- In the Cotswolds
I will give that a try biglad
