wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
now this I like...if I ever get some money together after fixing mine this will be the nxt project...yummy but prob not everyones cup of tea
trayback mmmmmmmmm
- Thread starter wiltshire landyman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
looks well put together
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
robint
Well-Known Member
- Posts
- 7,057
is that in petes garage ??
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
no but there may be a very similar one in the future
:tea:
robint
Well-Known Member
- Posts
- 7,057
so if yous ant got doors on it in the future can i have the heater back please
now this I like...if I ever get some money together after fixing mine this will be the nxt project...yummy but prob not everyones cup of tea
But will it look good on the back of the recovery truck for your journey home?
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
that's the whole point:doh:
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
I would have doorsso if yous ant got doors on it in the future can i have the heater back please
easye1
Banned
- Posts
- 8,557
from an engineering point of view, it looks very well put together, nice braces welded in at the various stress points of the cage.
If your going to that extreem, then length is your enemy as you say.
I question the use of 300`s though, is there too much electrikery, or can you bypass it ok.
(like fit a 200?)
If your going to that extreem, then length is your enemy as you say.
I question the use of 300`s though, is there too much electrikery, or can you bypass it ok.
(like fit a 200?)
Dan_Trials
Well-Known Member
- Posts
- 2,546
Is it a scale model or are you like 9 foot tall?
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
now this I like...if I ever get some money together after fixing mine this will be the nxt project...yummy but prob not everyones cup of tea
Don't need to worry about it floating away............. a divers dry suit comes to mind
:tea:
sprogthedog
Well-Known Member
- Posts
- 1,179
It's not my cuppa tea, but I can admire the engineering thats gone into building it.
- Posts
- 7,332
- Location
- Under my landy
so if yous ant got doors on it in the future can i have the heater back please
If you're after a Disco heater i've got one you can have.
I agree... it's ****e, but well engineered
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
Mine'll look like that one day only
A 90 version
onlyA 90 version
easye1
Banned
- Posts
- 8,557
just noticed the lugs welded into the rear part of the door "holes"
must be to fix sheet metal/ally into the shape, but leaves the reduced front part for getting yer lags over
must be to fix sheet metal/ally into the shape, but leaves the reduced front part for getting yer lags over
Mugsey
Active Member
- Posts
- 188
- Location
- Huntly Aberdeenshire
Wife would have a problem with this.
Where'd she put the bale of hay for the horses?!!
Where'd she put the bale of hay for the horses?!!
