TD5 ECM enquiry

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

The Mad Hat Man

Well-Known Member
LZIR Despatch Agent
Posts
83,296
Location
Embasinga stocæ
I know this is the injun section, but is there anyone on here that regularly works on TD5 Discos and defenders? I dont mean their own, i mean professionally.

If so can yu PM me
 
does anyone have a copy of the Rave which covers 07/08 or 09 TD5 disco/defenders?

I am looking for a copy of the ECM/throttle control circuit diagram, to see if it has changed from the 03 models.
 
No - you did not miss summat - it was my bad. My rave manual only covers up to 03. What i need is the ECM wiring diagram for later TD5 motors. I wasnt sure at what date the switched to the puma lump.
There seems to be a wiring difference between the early and later ECM looms to cope with the change in throttle control.
 
Last edited:
IIRC, and dont quote me on this, but I thought it was changed at 02MY and was the same until 06MY. I know my copy of Rave only has Pre-02 and Post-02 MY's...

And FWIW, the Puma engine started at 07MY ;)
 
early one have a 2 circut throttle latter ones have a 3 circut throttle 2001/02 models it changed on anything with a 2a chassis number are the latter ones
 
No - you did not miss summat - it was my bad. My rave manual only covers up to 03. What i need is the ECM wiring diagram for later TD5 motors. I wasnt sure at what date the switched to the puma lump.
There seems to be a wiring difference between the early and later ECM looms to cope with the change in throttle control.
Give me a bell in the morning - I have a few ideas....
 
Back
Top