TD4 EGR Air Filter
- Thread starter JonFre
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Is there an air filter on the EGR ?? Don't think so, but one never knows eh ?? Re the airfilter, sorry I can't answer. I put a K&N filter in my airfilterbox, is supposed to be ok for a lifetime.
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
do you mean the turbo crankcase breather filter ? if so, take the engine cover off, and its in the middle about 3/4 of the way from left to right, top of it looks a bit like the top of a syphon in a toilet cistern
That filter looks like:
Attachments
andytd4auto
New Member
- Posts
- 1,026
- Location
- on the other side!!!
would this filter have owt do do wi serious turbo lag and not a lot of power???
JonFre
Active Member
- Posts
- 557
aussielander
New Member
- Posts
- 468
- Location
- Western Australia
The filter you are talking about is not fitted or mounted as such, but on the end of some hose. on mine it hangs about back left corner of engine bay as you look from the front, behind the oil cap. looks like old style fuel filter.
JonFre
Active Member
- Posts
- 557
Excellent Aussie. 10 out of 10 to you! You are as good on TD4's as Casey Stoner is on two wheels!
Thank you.
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
i'm with you now, but I'm not sure it is anything to do with egr as egr is at front of engine.
aussie bob on, just hangs down at rear of engine, sole purpose to give new owners the fright of their life.
however, this sucks in through the filter, one end open to atmosphere, can't remember what it does though
aussie bob on, just hangs down at rear of engine, sole purpose to give new owners the fright of their life.
however, this sucks in through the filter, one end open to atmosphere, can't remember what it does though
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
top lad, knew it was related to turbo but couldn't remember how exactly
Billy-g
New Member
- Posts
- 121
- Location
- Liskeard, Sunny Cornwall
If my memory serves me right there is just a little clip off a pipe next to the MAF sensor that tidies it up a little, but a tywrap would do ya nicely me thinks.
Seconded on the need for replacement though, mines as clean as a whistle in comparison...
Seconded on the need for replacement though, mines as clean as a whistle in comparison...
