Some pics for Mr Grunt (Sliders)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Take5

New Member
Posts
2,403
Location
Harrogate or France
OK, I've fitted me sliders an me noo set of Machos in silver wheeley thingies. Couple of pics of before and after so you can see what they're like.

Where they're attached to the b/head main bolt, a pice of 5x80mm strip steel is welded on and shaved 6mm off the top for clearance. Then using an angle grinder a small notch is cut so it doesn't foul the metal piece that it the footwell frame. Hole drilled and filed, then bolted up under tension with yer jacking tube at the rear.
 

Attachments

  • Before.jpg
    Before.jpg
    94.4 KB · Views: 149
  • After.jpg
    After.jpg
    58.5 KB · Views: 142
  • after2.jpg
    after2.jpg
    78.6 KB · Views: 124
Aye, first piccy was wif the old rims an tyres that got ferked at Tong the other week.

Will take some more detailed pics of the detail around the b/head mount and the rear mount when daylight comes again. Will take a piccy or 2 of the finished item as well (it correlates to the drawings I sent you a while ago) when I take them off to give 'em another coat of Plastikote
 
Back
Top