shugster60
New Member
- Posts
- 5
Looking for any one in west lothian area who can re program my key any ideas or know some one, the other problem is the barrel is seized and won't turn with the key.
Re programming key
- Thread starter shugster60
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
take the lock out and clean, fix it tis the only way, you know its just going to kick your arse if you dont, fix it..
Be careful ! New keys are expensive. And don`t be tempted with "bargains". Only the genuine article will work. I think, no, I`m SURE, Irish Rover knows lots about this. I seem to remember there`s been a problem with the factory and don`t know if or not it`s been resolved? Long delay between ordering/receiving keys.
Landrover Diagnostics
New Member
- Posts
- 14
We test and repair keys/fobs by mail order and have Autologic for programming new. LandyZone is on our links page at ES Alternators, Glasgow, United Kingdom Automotive Engineering and Electronics.
Brian.
Brian.
dougdotcom
Active Member
- Posts
- 605
- Location
- Langley Mill. Nottingham
Ive got a old keyfob that dont opperate anymore, how do you get inside um? must be pressed by machine 
shugster60
New Member
- Posts
- 5
It is not a new key its the original key just needs re programmed can you do this with just the key?
shugster60
New Member
- Posts
- 5
Have the inner door skin off but cant see how to remove the barrel?
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
it has a clip on the back of it, untill you get your lock working, you will not be able to resync your key..
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Despite what has been written, NOBODY is able to reprogramme a P38 keyfob...the data is burnt into the keyfob by Huf (Manufacturers)
Re-synchronise an original keyfob..Yes. Repair an original fob...Yes (Possibly).
Reprogramme another fob from another car to your own...NO unless someone proves me wrong !!!
Again.....Buy a fob from Ebay etc. at you own risk and be 99.99% prepared to see your money disappear down the pan...especially if you are talking of the P38.
I have posted many replies on the subject, yet still many are lured into the trp of throwing their money away.
Autologic, Faultmate, Test Book......NONE of them have the capability of re programming keyfobs...100% guaranteed....FULL STOP.
:behindsofa:
Re-synchronise an original keyfob..Yes. Repair an original fob...Yes (Possibly).
Reprogramme another fob from another car to your own...NO unless someone proves me wrong !!!
Again.....Buy a fob from Ebay etc. at you own risk and be 99.99% prepared to see your money disappear down the pan...especially if you are talking of the P38.
I have posted many replies on the subject, yet still many are lured into the trp of throwing their money away.
Autologic, Faultmate, Test Book......NONE of them have the capability of re programming keyfobs...100% guaranteed....FULL STOP.
:behindsofa:
shugster60
New Member
- Posts
- 5
It is the original key I have not a new key the problem I have is the barrel is seized in the door.
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
what year is your car, is it petrol or doosel, you need to take door card off and look at mec, the bar thats comes off the barrel could be snaged. have you put any oil in it...
shugster60
New Member
- Posts
- 5
its a 99 diesel can get my hand to the back of the lock but can't see any clip?
Similar threads
