pipes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
well they made some difference to my old one as they do not seem to expand like the old ones do therefor boost goes immediately to the engine just go to fine why mine will not go much above 90 mph I am going to try the turbo boost solenoid next
 
Last edited:
teddywood1 said:
well they made some difference to my old ones as they do not seem to expand like the old ones do therefor boost goes immediately to the engine just go to fine why mine will not go much above 90 mph I am going to try the turbo boost solenoid next
Click to expand...

What 90mph!! Really or are to taking the pee. Top speed is only just over 90 and doing that speed in a 4x4 ain't clever.
Other than that did you order the bigger clips to hold your silicone hoses on or stick with the standard Ones, If standard have they blown off or not?
Mike
 
3 of the pipes arrived an hour ago so got stright on with fitting






But while the cover was off i noticed this



just awaiting the last silicone pipe to arrive aswell but all the turbo pipes have been done :)
 
like a numpty i forgot to measure the pipes for the new Tbar now fitted can someone tell me the sizes of them all otherwise i gotta take them all off again lol
 
teddywood1 said:
well they made some difference to my old ones as they do not seem to expand like the old ones do therefor boost goes immediately to the engine just go to fine why mine will not go much above 90 mph I am going to try the turbo boost solenoid next
Click to expand...

New hoses would make no difference to performance unless your old hoses had collapsed inside or were leaking. Old rubber hoses can "balloon" slightly under boost, but I'd seriously doubt you would feel it. The turbo can easily supply 300 cubic feet of air per minute at 18psi. A few cubic inches lost to a couple of ballooning hoses is nothing.
I suspect any improvements felt are simply a placebo effect.
 
Looks to me like you have a clogged up loo roll,,(CRANKCASE BREATHER FILTER)
get a Cyclone and fit it before you have more trouble that a bit of oil hanging around..
 
Seems Stratstone Hull have stopped selling on eBay, but get in touch with Cotswold BMW, and ask for part number 11127799367

They sponsor some BMW forums, and do discounted prices for forum members, used them plenty before in the past. They should be ok with doing postage

01432 375564 or email [email protected] seems their dedicated parts site is down

Whatever you do though, don't buy a copy part to save a tenner, the BMW part comes with a 2yr warranty as long as you keep the invoice, and the customer service on warranty is second to none, often they'll replace and fit the replacement themselves within the warranty period, completely FOC, even on a £10 part, which given main dealer labour rates were £95 p/h +vat last time I got work done, isn't bad!
 
You must log in or register to reply here.

Similar threads

Mr K
Freelander 1 Low on power - turbo vacuum pipes
Replies
2
Views
1K
Mr K
Mr K
C
Freelander 2 (LR2) Engine Removal Sequence
Replies
1
Views
693
fashratty
F
S
Knock knock
Replies
3
Views
477
Nodge68
Nodge68
R
Freelander TD4 starting problems
Replies
4
Views
334
Alteredtech
Alteredtech
K
What money should I be asking?
2
Replies
20
Views
1K
Atomician
Atomician
Back
Top