P38 key code lockout

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
B

Biglad2222

Member
Posts
35
Location
Tayside
Hi p38 dash reading key lockout ,door locks randamly locking and now wont start without alarm going off is it the sensors in the front door locks to blame
 
You usually get that message if you've tried to enter the EKA code too many times.if you have to enter the code open the door after two attempts then you will have three more available. Leave the car for about 30 minutes until the lockout message clears itself.
 
tomcat59alan said:
You usually get that message if you've tried to enter the EKA code too many times.if you have to enter the code open the door after two attempts then you will have three more available. Leave the car for about 30 minutes until the lockout message clears itself.
Click to expand...
Ok thanx i will try that do you think tho it is a door sensor issue as car was locking itself
 
Biglad2222 said:
Ok thanx i will try that do you think tho it is a door sensor issue as car was locking itself
Click to expand...
None of the sill buttons are sticking are they, do a search there was a microswitch test sheet posted by martyuk,you'll have to take the door card off for access to the wiring but I think the lock can stay in place what year is your car? There are two types of lock fitted,the early one has two plug connectors. Welcom by the way.
 
tomcat59alan said:
None of the sill buttons are sticking are they, do a search there was a microswitch test sheet posted by martyuk,you'll have to take the door card off for access to the wiring but I think the lock can stay in place what year is your car? There are two types of lock fitted,the early one has two plug connectors. Welcom by the way.
Click to expand...
Hi thankyou the lock has one plug connection the car is a T plate
 
Any idea where Marty’s test sheet gets downloaded to all I’m getting is to download it as it’s not opening and no option as where to download it to
 
You must log in or register to reply here.

Similar threads

M
P38A Finally have time to be back on forums again
Replies
4
Views
333
brianp38dse
brianp38dse
F
2001 P38 2.5 Diesel EKA Via NANOCOM
2
Replies
35
Views
2K
Datatek
Datatek
M
Central lock
2 3 4
Replies
74
Views
2K
mikkre
M
I
P38 BeCM locked?
Replies
8
Views
873
pwood999
pwood999
feyniriel
P38 key not locking the car
Replies
13
Views
1K
Grrrrrr
Grrrrrr
Back
Top