Best bit of advice given that!
Ongoing work
- Thread starter Badger
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Best bit of advice given that!
Badger
Well-Known Member
- Posts
- 4,669
- Location
- Marldon, Devon
MOT re test @ 2pm tomorrow, only concern i really have now is she's been blowing grey smoke for some time and i don't want her to fail on the smoke test, i read somewhere taking her for a good run before the test helps reduce smoke output, is this true?
I'd like to say i will do the tappet clearances before the test as it is on my ' to do ' list, but chances are it wont happen.
Any tips appreciated
I'd like to say i will do the tappet clearances before the test as it is on my ' to do ' list, but chances are it wont happen.
Any tips appreciated
MOT re test @ 2pm tomorrow, only concern i really have now is she's been blowing grey smoke for some time and i don't want her to fail on the smoke test, i read somewhere taking her for a good run before the test helps reduce smoke output, is this true?
I'd like to say i will do the tappet clearances before the test as it is on my ' to do ' list, but chances are it wont happen.
Any tips appreciated
SVO and get the engine hot
Badger
Well-Known Member
- Posts
- 4,669
- Location
- Marldon, Devon
will do
tombardier
Well-Known Member
- Posts
- 1,076
- Location
- F.O.D, UK.
disconnect your breather pipe from the air intake
Badger
Well-Known Member
- Posts
- 4,669
- Location
- Marldon, Devon
Re test was at 2, unfortunately i was at the side of the A380 trying to hammer the exhaust manifold back together after a bolt sheared and it fell off
Retest tomorrow...
Retest tomorrow...
Badger
Well-Known Member
- Posts
- 4,669
- Location
- Marldon, Devon
I've removed the turbo from the manifold, ive also removed the 4 bolts that I assume hold the intake side of the turbo from the exhaust side, should it now come apart?
I wanted to check the seal as I have an awful lot of oil in the intake side and I can only assume its the seal in the turbo shaft doing this.
I wanted to check the seal as I have an awful lot of oil in the intake side and I can only assume its the seal in the turbo shaft doing this.
Badger
Well-Known Member
- Posts
- 4,669
- Location
- Marldon, Devon
I have a cracked turbo
It's not looking too good tonight.
It's not looking too good tonight.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,186
- Location
- Gloucestercotshirewolds
I have a cracked turbo
It's not looking too good tonight.
The actual turbo or manifold?
Badger
Well-Known Member
- Posts
- 4,669
- Location
- Marldon, Devon
Turbo
Here's a pic:
After cleaning the soot off, it has 3 cracks running across and one of them goes all the way through as it can be seen on the other side ( which is inside the bit that comes off the manifold.
Also the play in the turbo fins is about the same as the gearstick in the cab, in fact i'm surprised it hasn't self destructed by now
The amount of oil in it can be seen in these pics, i know it's not unusual to have some oil, but this takes the proverbial
Had enough for tonight, will get back on it tomorrow morning.
Fur Trapper
Banned
- Posts
- 8,481
- Location
- international
Give it a viking burial
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Jesus mate...thats been an arse of a motor...
Badger
Well-Known Member
- Posts
- 4,669
- Location
- Marldon, Devon
Jesus mate...thats been an arse of a motor...
To be fair the turbo and manifold were off the 19J so i imagine the cracks were due to heat stress when it was on that, but who knows.
I keep meaning to grab a 200Tdi defender turbo n manifold, but everytime i got cash to get one, ebay's empty
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
ya turbo is goosed ya need a noo one
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Is it a disco Injun????
Badger
Well-Known Member
- Posts
- 4,669
- Location
- Marldon, Devon
Defender mate, it came from Wiltshire Landyman and he kept the other bits, i just swapped over from the 19J.
Not complaining about the engine, i got it for nowt
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Can't help ya then
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,186
- Location
- Gloucestercotshirewolds
got a disco turbo but dont know if it'll fit a 19j manifiold
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
I feel your pain Paul!
I thought I was the only one that owned a jinxed landy, it seems im not.
Best of luck.
I thought I was the only one that owned a jinxed landy, it seems im not.
Best of luck.
Badger
Well-Known Member
- Posts
- 4,669
- Location
- Marldon, Devon
I'm not sure either, i doubt it as the disco turbo's are mounted down the side so i imagine the manifold output is different but if the price is right then i can look into upgrading the manifold to either a disco one and change the downpipe as well, how much did you have in mind for the turbo?
