On the scrounge

Shifty1962 · Mar 28, 2009

Howdy all.

Whilst changing all the bushes on me motor I got to the last few on the rear shocks and guess what?

I've sheared the upper shock mounting bracket on the rear driverside. It is part of a casting and I think they are the same both sides. Not sure if the TD5 brackets are different to earlier motors though.

I've attached a piccie from my RAVE disc but my bracket looks a little different as it has five mounting holes and not three. Only three are used but different holes for each side. The part in question is labelled 6 in the picccie.

Anybody got a spare that they dont want?
There's beer tokens in it for you.

I can't believe all the others went reasonably smoothly and virtually the last one went tits up.

jai_landrover · Mar 28, 2009

this is common,

I know I hate to say it but Ebay was the cheapest I found about q fiverplus postage. Jai

Shifty1962 · Mar 28, 2009

Can you remember where you got them?
Ebay has them for £17 plus postage.
Fiver is more my style.
Cheers

Shifty1962 · Mar 28, 2009

Does anyone know the thread size on the upper mount?
I need to get a new lock nut as the old one has the remains of the sheared bit in it.
I dont want to risk taking the other side off to measure it until I've got the new bits.
My local machine shop has hundreds of nuts and bolts but I need the size and thread.
I'm guessing metric as its a 1998 Defender ?
I dont want to go to my Landy stealer because I live in Surrey and they think I'm rich. They'd probably try to charge me a fiver for the nut.
Cheers all.

Shifty1962 · Mar 28, 2009

This is the offending item.
Found them on eBay at £18 each plus £7 postage.
Probably Britpart but beggars can't be choosers.

rory1 · Apr 13, 2009

i cant remeber if its a 17mm Nut or a 19mm, if its a 17mm then the thread will be M10,
if its a 19mm nut then the thread will be M12

jai_landrover · Apr 13, 2009

discomania · Apr 13, 2009

I THINK I have one in the garage - I will look in the morning if you still need it.

Shifty1962 · Apr 15, 2009

discomania said:
I THINK I have one in the garage - I will look in the morning if you still need it.

Cheers Disco.
Got one off eBay and picked up some M12 stainless nylocs as well.
Just got back from Algeria so I'll get it done at the weekend.

discomania · Apr 15, 2009

Algeria - only 4 countrys over is Somalia you aren't a pirate are you?

Shifty1962 · Apr 16, 2009

discomania said:
Algeria - only 4 countrys over is Somalia you aren't a pirate are you?

Oooops - you've rumbled me :doh:

No, I've been working for one of the oil companies teaching their local drivers how to keep their 4x4s the right way up in the sand dunes.

Good fun but the scenery is boring - sand and oil rigs as far as the eye can see in all directions.

iannotts · Apr 16, 2009

Why dont people ask before buying off ebay .......:frusty:

I am POSITIVE if you look in the section for spamming bastids in the anything goes section there is someone (ME) selling landy parts

jzcktv · Apr 16, 2009

iannotts said:
Why dont people ask before buying off ebay .......:frusty:

I am POSITIVE if you look in the section for spamming bastids in the anything goes section there is someone (ME) selling landy parts

Don't you just hate it when a perfectly good customer walks past the shop...

iannotts · Apr 16, 2009

jzcktv said:
Don't you just hate it when a perfectly good customer walks past the shop...

And 9 times out of 10 spends more on the same part than they need to, trust me I know the mark up of stuff on ebay

Shifty1962 · Apr 17, 2009

iannotts said:
Why dont people ask before buying off ebay .......:frusty:

I am POSITIVE if you look in the section for spamming bastids in the anything goes section there is someone (ME) selling landy parts

Did not think to look on here for sellers.
So did you have any and how much would you have charged?
Now I know you have spares I'll put you top of my list but I needed the part sharpish because my Landy was zebedeeing down the road and I was off to Algeria in a few days.

iannotts · Apr 17, 2009

Shifty1962 said:
Did not think to look on here for sellers.
So did you have any and how much would you have charged?
Now I know you have spares I'll put you top of my list but I needed the part sharpish because my Landy was zebedeeing down the road and I was off to Algeria in a few days.

Have you got the part number to hand?

(save me looking)

Add me to MSN messenger if you have it (Click the blue man under my post count)

Sirus · Apr 17, 2009

Note he said he needs it quick hehehehehe

iannotts · Apr 17, 2009

Sirus said:
Note he said he needs it quick hehehehehe

We have changed the system a bit now

On the scrounge

Shifty1962

Well-Known Member

Attachments

jai_landrover

Well-Known Member

Shifty1962

Well-Known Member

Shifty1962

Well-Known Member

Shifty1962

Well-Known Member

Attachments

rory1

New Member

jai_landrover

Well-Known Member

discomania

Well-Known Member

Shifty1962

Well-Known Member

discomania

Well-Known Member

Shifty1962

Well-Known Member

iannotts

New Member

jzcktv

New Member

iannotts

New Member

Shifty1962

Well-Known Member

iannotts

New Member

Sirus

Your all Banned except me

iannotts

New Member

Similar threads