You can only do it for (closest thing) hate speech.... just did it lol
I just bought a 1997 Range Rover, Wont even turn over next day of sale.
- Thread starter AudioInstigator
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
You can only do it for (closest thing) hate speech.... just did it lol
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
one does not rewire a Range Rover !!
there is a BeCM under the seat (Body Electrical Control Module) that is the brain for the car, pretty much most things go through the BeCM. don't be effing about with it either. you cant. you'll only end up in a world of hurt if you do. you have been warned. there are also a number of different modules, for the HVAC, Gearbox, Engine management, EAS etc. the Range Rover isn't like an F150 in a pretty body with comfy seats.
it is tough to find out what the issue is without dedicated diagnostics. generic might help but it wont get you into the BeCM.
the saving grace you have is that it was running before you started with the audio
have you downloaded RAVE yet ???
AudioInstigator
Member
- Posts
- 72
- Location
- Calgary Alberta
where do I get rave and what is it ?
The engine was running while he pulled the stereo out... I've asked after reading OP and confirmed by him... what does that suggest to you.. @ukadamwest
Rave is not going to help you at this stage... have you got the engine cranking with new battery? ...if so pull a plug lead and see if you've a spark...
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
honestly, I don't know. the audio wiring shouldn't mess with engine running at all.
I note that the OP had no dash lights when he bought it, it seems to be on coils, different keys. the thing sounds like its been owned by fudgetards who have bodged it up or used clueless garages that have bodged it up. the OP also said he removed what sounds like an after market pre-warmer.
he's turning the y key and getting clicking so something is inhibiting it somewhere.. i'm interested to know if the key locks and opens remotely and if so, how does a different key start it ???
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
I said earlier that RAVE is the workshop manual huge file 500mb.. its in the stickies put RAVE into the search bar
AudioInstigator
Member
- Posts
- 72
- Location
- Calgary Alberta
No crank yet , iam just really wondering about my keys, like don't i need to do the eka procedure, but my driver door lock key is different from my ignition key with fob on it ??? fob works for locks but not driver side, red alarm light shuts off and doors lock and unlock with key, and no engine disabled on gauges. So is alarm ready for engine start at this point or no ....
Holly shut you've got problems...do you know the eka code cause you enter using key in door lock...
AudioInstigator
Member
- Posts
- 72
- Location
- Calgary Alberta
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
AudioInstigator
Member
- Posts
- 72
- Location
- Calgary Alberta
Yes there was a card in glove box that had the eka on it
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
AudioInstigator
Member
- Posts
- 72
- Location
- Calgary Alberta
i can use key or fob
AudioInstigator
Member
- Posts
- 72
- Location
- Calgary Alberta
And key with fob dont work in door just the plain one does
ukadamwest
Well-Known Member
- Posts
- 2,990
- Location
- Surrey
sorry I may being dense, but not getting this...
so you can remote unlock it with the fob that is the same one that starts it, but you need to use the odd key shaft to lock it off the key ?
AudioInstigator
Member
- Posts
- 72
- Location
- Calgary Alberta
yes thats right
