just wont start
Member
- Posts
- 25
- Location
- Mansfield
Hi all, its been a long long while since ive written something. obviously i have looked at the many posts about this issue but i cant for the life of me get my freelander 2 2007 hse to start, help please.
Key in the port, press the button, everything lights up, press the clutch and start button and no start. Battery is charged, All the earth connections cleaned and checked, fuses ok, new solenoid kit on the starter, even tried a steering lock emulator. I can bridge the terminels on the starter and it cranks but no start, this also checks out the earths, doesnt seem to be a signal to the starter and also when the steering lock emulator was plugged in it didnt light up at all, This tells me its a immobiliser fault. Any ideas folks ?
My friend pugged in his basic diagnostic and it came up with the nasty code P1259-84 immobilizer to powertrain control module signal error ?
Ps i looked under the air box and the loom isnt broken anywhere. I really dont want to go to landrover as it will probably cost as much as the car is worth although it is in great condition.
Regards Kevin
Key in the port, press the button, everything lights up, press the clutch and start button and no start. Battery is charged, All the earth connections cleaned and checked, fuses ok, new solenoid kit on the starter, even tried a steering lock emulator. I can bridge the terminels on the starter and it cranks but no start, this also checks out the earths, doesnt seem to be a signal to the starter and also when the steering lock emulator was plugged in it didnt light up at all, This tells me its a immobiliser fault. Any ideas folks ?
My friend pugged in his basic diagnostic and it came up with the nasty code P1259-84 immobilizer to powertrain control module signal error ?
Ps i looked under the air box and the loom isnt broken anywhere. I really dont want to go to landrover as it will probably cost as much as the car is worth although it is in great condition.
Regards Kevin
