Help with rear damper fittings

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
smckeown73

smckeown73

Active Member
Posts
136
Location
Sompting, West Sussex
I'm totally confused with regards to where the washers go, based on what ive taken off, what's provided by procomp and the video ive seen on youtube. For a starters the video suggests in between both bottom rubber buses, there's a metal cup either side. Well I dont have enough washers for that.

Also the exact sequence for the metal barrel is a mystery

Here's a pic of what I have currently. The old washers are from both sides combined, the new ones are for one side.

rear_shock_fittings.JPG


Help appreciated..
Sean
 
I think the vid confused me with a cup / washer either side of both rubber bushes. Surely below is the correct way, the gap being where its mounted to the bottom mount, with the barrel being pointless:

surely.JPG
 
You must log in or register to reply here.

Similar threads

M
help with valuation
Replies
15
Views
2K
Knappster
Knappster
Flossie
Steering damper query.
Replies
5
Views
819
Flossie
Flossie
NiallRussell
Going from a Double Cab to a station wagon.
Replies
7
Views
2K
benpalmer
benpalmer
S
Can anyone help ID this weird rear axle and stub axle?
Replies
10
Views
3K
jamesmartin
jamesmartin
Nodge68
Freelander 2 (LR2) LR trouble codes.
Replies
6
Views
39K
Keith Kernow Kernewick
Keith Kernow Kernewick
Back
Top