FTC 4905 Diff lock mech, what is in the kit?

Anybody know?

my Centre diff mech is fubar and wont slip in to lock, all works fine if i get underneath with a 13mm spanner and manually lock it but from the cabin its like stirring a pot of jam, way too much play on everything down there from what i can see. It is a 20 year old bit of kit that is heavily used off road so the little stick gets some hammer and now its all baggy

all the holes are bigger than they should be i think and loose loose loose.


so if i buy one of the afore mentioned bits does it come with everything i need to make her nice and tight and responsive again?

Ta

Pol

FTC4905??? ... double check that cos IMO it's wrong

thats the lever but its more likely the plastic bushes/pivot or top bolt to lever loose or the lower link

jamesmartin said:

thats the lever but its more likely the plastic bushes/pivot or top bolt to lever loose or the lower link

Click to expand...

James is there a part number for the bushes?

I want to have everything to hand for when i start to strip it down as nowhere will be open on the day as is always the case with weekends in Poland.

Cheers

sierrafery said:

FTC4905??? ... double check that cos IMO it's wrong

Click to expand...

yep you are right sorry it was a typo it is FTC 4095

DiscoPol said:

James is there a part number for the bushes?

I want to have everything to hand for when i start to strip it down as nowhere will be open on the day as is always the case with weekends in Poland.

Cheers

Click to expand...

frc4499

jamesmartin said:

frc4499

Click to expand...

Thanks squire.

DiscoPol said:

yep you are right sorry it was a typo it is FTC 4095

Click to expand...

thought so .... see this, nr 7 Allbrit.de - Ersatzteile für LAND ROVER & MG ROVER